Match of Martha Stewart™ 8347 Buckboard *

Yes. MyPerfectColor can make a custom spray paint match of 8347 Buckboard for small parts and hardware where a smooth spray finish is practical. It is a good fit for items like switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar removable parts.

Keep in mind that the final look can change with the surface material, texture, and finish, so a spray test on the actual item is the safest way to confirm the result before coating the full set of parts.

Coverage depends on the surface size, texture, porosity, hiding power, application method, and how many coats you need. As a general planning guide, one can of spray paint covers about 20 square feet with one coat.

If you are coating small parts such as vents, brackets, or hardware, one can may go further or shorter depending on overspray and the number of coats. If you are not sure, plan for extra product so you do not run short before finishing the job.

For 8347 Buckboard in spray paint, dry-to-touch, recoat time, and full cure are different stages. Spray paint is usually dry to touch within minutes, can typically be recoated in 1 to 2 hours, and is fully cured in about two weeks.

If the part needs to be handled, assembled, or installed, wait for the coating to reach the stage that matches your use. Recoating too soon can affect appearance and film quality, so follow the product directions for the specific item and conditions.

Good prep helps the match look more consistent on the finished part. Before spraying 8347 Buckboard, clean the surface, remove grease or wax, and lightly scuff the area if the material allows it. Mask off any areas that should not be painted.

Because adhesion can vary by substrate, it is smart to test the paint on the actual surface first, especially on plastic, metal, or previously coated parts. That small test can show whether extra prep or primer is needed before you coat the full item.

The SDS is tied to the MyPerfectColor paint product and its chemistry, not to the 8347 Buckboard color name alone. If you need safety information, check the MyPerfectColor Safety Data Sheets page for the specific product you are ordering.

If you are comparing formats, make sure you review the SDS for the exact paint type you plan to use, such as spray paint, since the safety information can differ by product chemistry.

MyPerfectColor has an original sample of the Martha Stewart 8347 Buckboard in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While MyPerfectColor can provide paint matched to the Martha Stewart 8347 Buckboard, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.