Match of Valspar™ 5011-2 Very Black *

For spray paint matched to Valspar 5011-2 Very Black, expect it to be dry to the touch within minutes, ready for recoating in about 1 to 2 hours, and fully cured in about two weeks. Dry to the touch, recoat, and full handling are different stages, so do not treat them as the same milestone.

If you are coating hardware, frames, vents, or other parts that will be installed or handled, wait until the coating is fully dry before putting the item back in service, and allow the full cure time when a harder finish is important.

Confirm Valspar 5011-2 Very Black from a physical swatch, original brand reference, or another known color sample before you order. Screen viewing alone is not a reliable way to verify the target color.

MyPerfectColor matches to the selected brand color standard, so the key ordering step is making sure Valspar 5011-2 Very Black is the exact reference you want. If you are matching an existing painted part, check whether the surface has aged, faded, or been repainted before you place the order.

No. The same match of Valspar 5011-2 Very Black can look different in matte, satin, or gloss because the finish changes how light reflects off the surface. That changes the way the color reads after application.

If you need the finished part to coordinate with an existing surface, the finish is part of the match decision. Choose the sheen you want for the project, then expect the same color code to appear a little different if the finish changes.

Choose the sheen based on how the item will be used, not just the color code. A lower sheen reduces reflectivity, while a higher sheen is usually easier to wipe down and can be a better fit for handled parts.

For a match of Valspar 5011-2 Very Black, remember that sheen changes how the color looks on the finished item. If the part will sit near another painted surface, the gloss level can matter as much as the color reference itself.

Yes. A match of Valspar 5011-2 Very Black is well suited to small project items such as baskets, frames, shelving, brackets, hardware, and decor pieces when spray application is the easiest way to coordinate the object to a known brand color.

For best results, prepare the surface correctly and consider a test spray on the actual material, especially on plastic, metal, wicker, or previously coated parts. Those surfaces can affect adhesion and the final look of the color.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 5011-2 Very Black enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 5011-2 Very Black you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 5011-2 Very Black in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.