Match of Valspar™ 4003-2A Cathedral Stone *

For a better result, clean the surface first, remove grease or dirt, and let it dry before painting with a match of Valspar 4003-2A Cathedral Stone from MyPerfectColor. If the surface has loose paint, rust, or failing coating, remove that first. Light scuffing can help where appropriate, especially on smooth or glossy areas.

Mask off areas you do not want painted and test the matched paint on the actual surface before doing the full job. That is the safest way to confirm adhesion and make sure the finish and substrate are working well together.

The sheen you choose changes how Valspar 4003-2A Cathedral Stone will look after it is applied, even when the color match is correct. Higher sheen finishes are more reflective and usually easier to clean, while lower sheen finishes reduce shine and can make surface differences less noticeable.

Choose the finish based on the item, the amount of wear it will see, and the look you need on the finished part. If you are matching a specific existing surface, remember that sheen can change the appearance of the same color a lot, so order the finish that best fits the project.

Use light, even coats when applying a match of Valspar 4003-2A Cathedral Stone in spray form. Keep the passes consistent, overlap slightly, and avoid heavy wet coats that can run or leave an uneven sheen.

Multiple light coats are usually safer than one heavy coat, especially on small parts, trim pieces, hardware, or fixtures. Drying time can vary with temperature, humidity, and coat thickness, so let each coat set before adding the next one.

Yes, MyPerfectColor spray paint can work on many plastics, but plastics vary a lot, so testing on the actual part is important. If you are painting a plastic item to match Valspar 4003-2A Cathedral Stone, surface prep matters because some plastics are harder to bond to than others.

For better adhesion, use the MyPerfectColor primer made for this type of application when needed. If the plastic is slick or low energy, a test panel is the best way to confirm the prep and primer choice before you paint the full part.

A typical can of MyPerfectColor spray paint covers about 20 square feet with one coat when you are using a match of Valspar 4003-2A Cathedral Stone. Actual coverage can be less if the surface is rough, porous, or needs extra coats for even hiding.

Plan based on the total surface area, the number of coats you expect to apply, and whether the item has edges, curves, or detailed areas that use more paint. For larger projects, it is safer to order extra rather than assume one can will be enough.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 4003-2A Cathedral Stone enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 4003-2A Cathedral Stone you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 4003-2A Cathedral Stone in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.