Match of Valspar™ 7003-24 Ivory Dust *

Verify Valspar 7003-24 Ivory Dust against a physical swatch or a known existing sample from the original Valspar color, not from a screen image. MyPerfectColor matches the selected brand color standard, so confirming the target reference first helps avoid ordering the wrong match.

If the color must line up with an existing part or surface, compare to the actual chip or approved sample before placing the order.

Choose the finish based on how the part will be used and how much shine you want on the finished item. A glossier finish is usually easier to clean and can feel more durable, while a flatter finish reduces reflectivity.

Keep in mind that the same match of Valspar 7003-24 Ivory Dust can look a little different in different sheens, so confirm the finish before ordering if it must coordinate with other coated parts.

Yes, but plastics vary widely, so test on the actual item before coating the full part. MyPerfectColor spray paint sticks well to most plastics, but using the MyPerfectColor primer for Acrylic Enamel can improve adhesion on difficult or low-energy surfaces.

For unfamiliar plastic, clean the part first and check a small test area so you can confirm adhesion and appearance before finishing the whole piece.

Clean the surface first to remove dirt, grease, and other contamination, then remove any loose rust or failing paint. If the existing coating is sound but glossy, scuff it so the new coating can grip better.

The gloss, texture, and condition of the old surface can change how a match of Valspar 7003-24 Ivory Dust looks after spraying, so test first when the final appearance matters.

MyPerfectColor spray paint is typically dry to the touch within minutes, can usually be recoated in 1-2 hours, and reaches full cure in about 2 weeks.

Those steps are different milestones: a part may feel dry quickly but still need more time before heavy handling or service.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 7003-24 Ivory Dust enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 7003-24 Ivory Dust you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 7003-24 Ivory Dust in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.