Match of Valspar™ 7002-15 Chef White *

Clean the part first so dust, oils, and grease do not interfere with adhesion. If the surface is glossy or smooth, a light scuff can help the coating grip better, but only if the substrate and existing finish allow it. Mask off areas that should not be painted, and test 7002-15 Chef White on the actual item before you commit to the full project.

For best results, make sure the surface is dry and sound before you spray. If you are coating an older painted item, check that the existing finish is firmly attached and not chalking or peeling.

The SDS is tied to the specific MyPerfectColor product and chemistry, not to the 7002-15 Chef White color name by itself. If you need the Safety Data Sheet, use the SDS for the exact MyPerfectColor paint format you are ordering.

MyPerfectColor Safety Data Sheets can be found on the Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. If you are comparing formats, make sure you are looking at the SDS for the same product type you plan to use.

Finish changes how much light the coated surface reflects, so the same 7002-15 Chef White color can look different after application depending on sheen. A higher sheen will reflect more light, while a lower sheen will look less reflective. Texture and substrate also affect how the color reads once it is sprayed.

If you are matching an existing part, use the same finish whenever possible so the coated item reads closer to the surrounding surface. If you are painting a new item, choose the finish based on the look and wear characteristics you need, not just the color name.

Choose sheen based on how the part will be used and how much reflectivity you want on the finished piece. Higher sheen finishes are generally easier to wipe down and show more reflection, while lower sheen finishes reduce reflection and can be better when you want the coating to look less shiny on the item.

For 7002-15 Chef White, the sheen can change the way the color appears after it dries, so do not treat the color code as a sheen reference. If you are trying to coordinate with an existing surface, match the sheen as closely as you can before deciding on the final product option.

Yes, MyPerfectColor spray paint can be used on many plastic parts, but plastics vary a lot, so testing on the actual material is important. Some plastics need more prep than others, and adhesion can improve when you use the right primer and surface preparation.

If the plastic is difficult or low-energy, use the MyPerfectColor primer for Acrylic Enamel to help adhesion before applying 7002-15 Chef White. Always test the full system on a small hidden area first so you can confirm adhesion and appearance on that specific plastic.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 7002-15 Chef White enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 7002-15 Chef White you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 7002-15 Chef White in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.