70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Valspar 1010-7 Berry Brown is a very dark reddish brown with a muted berry or plum undertone. It reads as a brown-first color, but the red cast stays visible enough to give it a deeper wine-like character rather than a plain neutral brown.
MyPerfectColor custom spray paint matched to the selected brand color is useful for small parts and removable pieces that need a consistent dark finish. It can be sprayed on metal brackets, railings, vents, speaker grilles, switch plates, mailboxes, shelf supports, knobs, and hardware, as well as PVC trim pieces, shutters, and other exterior components that need a coordinated color match.
Because this is a dark color with very low LRV, surface preparation matters. Scuffs, texture, and uneven substrate color can show through more readily than they would in a lighter paint, and the final result may need careful coverage to reach an even depth. Sheen also affects the look: glossier finishes can make the color appear richer and darker, while flatter finishes can soften the red undertone.
On mixed materials such as metal, plastic, wood, or previously coated parts, the final appearance can shift with film build and substrate texture. Allow enough coat coverage for uniform color and keep expectations realistic when spraying over lighter or patchy bases, since the deep tone may take more passes to settle into a consistent finish.
Similar colors:
The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.
MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar 1010-7 Berry Brown by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.
The colors shown on this website are computer video simulations of the Valspar 1010-7 Berry Brown and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar 1010-7 Berry Brown. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Confirm the target from a physical Valspar swatch, an existing painted part, or another known color reference for 1010-7 Berry Brown. Screen viewing can shift the color, so it is not a reliable way to approve the match.
MyPerfectColor makes a custom match to the selected Valspar color reference. It is not the original Valspar paint product, so verifying the exact reference before ordering helps avoid getting the wrong match.
Yes, but plastics vary a lot, so test on the actual material before committing to the full project. A coating that works well on one plastic may not behave the same on another low-energy surface.
MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. For the best result, clean the part first and test the color and adhesion on the specific item you plan to paint.
No. The same color reference can read differently in matte, satin, or gloss because the finish changes how light reflects off the surface. A glossier finish usually makes the coating look deeper, while a flatter finish can make it look softer.
If you are matching a part that will sit near an existing coated surface, make finish choice part of the order decision, not just the color code. MyPerfectColor matches the selected color reference, but the final appearance still depends on the finish you choose and the surface it goes on.
Clean the surface first, then remove loose paint, rust, dirt, oil, or other contamination. For metal and previously coated parts, a light scuff can help the new coating adhere more consistently.
The condition of the old surface matters. Gloss, texture, and any damage in the existing coating can change how the new match of Valspar 1010-7 Berry Brown looks after application, so a test area is a smart step when the part is visible or hard to replace.
Coverage depends on the size of the part, the texture of the surface, how much hiding power is needed, the application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet.
If you are painting a small item such as trim pieces, vents, hardware, or fixtures, order based on the total surface area and the number of coats you expect to need. If the part is textured, porous, or a difficult substrate, plan for more material than a smooth surface of the same size.
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 1010-7 Berry Brown enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 1010-7 Berry Brown you are looking for is in our library. We are able to make paint and verify that it matches the original.
Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.
While we can provide Valspar 1010-7 Berry Brown in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.