Match of Valspar™ 1007-8C Sweet Pastel *

Confirm 1007-8C Sweet Pastel from a physical swatch or another known existing color reference from Valspar, not from a screen image alone. MyPerfectColor makes a custom-matched paint to that selected brand color reference, so the key ordering step is verifying that you have the correct original color target before you buy.

If the color came from an older painted part, check the reference carefully because aging, glare, and prior coatings can affect how the existing surface looks. Ordering starts with the correct color reference, then the MyPerfectColor match is made to that target.

Use light, even coats and keep a consistent spraying distance so the color builds gradually. Overlapping passes slightly helps reduce striping and helps 1007-8C Sweet Pastel lay down more evenly on the part you are painting.

Avoid heavy wet passes, since they can cause runs, uneven sheen, or a muddy-looking build. If the item is a small fixture, cover, grille, or hardware piece, test the spray pattern on a scrap or hidden area first and let each coat flash off before adding the next one.

Once 1007-8C Sweet Pastel is applied, lighting, sheen, placement, and nearby surfaces can change how the matched color reads on the finished item. The same MyPerfectColor match can appear a little different on a flat panel, a curved part, or a surface viewed in bright daylight versus indoor light.

If the item will sit next to another painted surface, check the final location before finishing the whole part. A match made to the selected brand color can still look different because the surrounding environment affects how your eye sees it.

MyPerfectColor spray paint sticks well to most plastics, but plastics vary a lot, so test on the actual material before painting the full part. For difficult or low-energy plastics, using the MyPerfectColor primer can help improve adhesion and reduce the risk of poor bonding.

For items like covers, trim pieces, grilles, or small plastic fixtures, surface preparation matters as much as color matching. Clean the part, use the right primer if needed, and confirm that the substrate can accept paint before you commit to the full project.

The Safety Data Sheet is tied to the MyPerfectColor product and its chemistry, not to the Valspar color name by itself. To find the SDS for 1007-8C Sweet Pastel, use the MyPerfectColor Safety Data Sheets page and look for the SDS that matches the product you are ordering.

If you are comparing product formats, make sure you check the SDS for the exact MyPerfectColor item, since different paint chemistries can have different safety documents.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 1007-8C Sweet Pastel enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 1007-8C Sweet Pastel you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 1007-8C Sweet Pastel in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.