Looking for color by Hex, RGB, CMYK, or Lab?

RAL 9005 Jet Black Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL9005 Jet Black is a technical specification black used for equipment, architectural accents, and industrial components requiring deep, neutral coverage.

RAL9005 Jet Black registers a very low lightness (L=3.37) and extremely low Light Reflectance Value (LRV 0.47), making it functionally near-opaque under most viewing conditions. With values a=-0.25 and b=-1.73, it is a near-neutral black with a barely perceptible cool bias (slightly toward blue, indicated by b and hue angle 261.78). The chroma of 1.75 is extremely low, confirming the absence of discernible color undertones and contributing to its neutral, uncolored appearance. Higher gloss may slightly increase the sense of depth or darkness; matte finishes can soften reflection but will not significantly shift its neutral character.

Typical applications include industrial equipment and machinery requiring standardized black finishes; architectural metalwork, structural elements, and exterior fixtures; commercial furniture, cases, and enclosures for electronic and technical equipment; automotive components where matte or gloss black is specified to RAL standards; and field touch-ups and maintenance coatings where RAL conformance is required.

RAL9005 Jet Black is engineered for visual consistency and specification-driven projects where a true, unshifted black is mandated. Its near-zero lightness and minimal chroma mean it absorbs virtually all incident light, minimizing glare and distractiona key benefit in technical and industrial contexts. It is resilient to most lighting conditions; however, finish (gloss vs. matte) will influence perceived reflectivity, not color cast. For critical visual matches, sampling against adjacent materials is advised, as textural or sheen differences between powder and liquid applications can impact perceived depth.

Digital approximations
Values
HEX: #0A0C10
RGB: 10, 12, 16
LAB: 3.4, -0.2, -1.7
Insights
- The L value (3.4) and LRV (0.47) confirm that this is an exceptionally dark black, minimizing visible reflection and surface detail.
- Both a and b values are close to zero, demonstrating the color's neutrality and absence of color biasno perceptible warmth or coolness dominates, although there is a minor blue tilt.
- Digital approximations can appear flatter or lighter on screens due to display characteristics; paint application on surfaces may look even deeper, especially in low-gloss finishes.

Digital values are approximations.
Paint appearance varies by finish and lighting.

Similar colors:
RAL9011 Graphite Black slightly lighter and with a very mild grey undertone.
RAL9004 Signal Black marginally lighter, with less blue bias, appearing softer and less deep.
RAL7021 Black Grey much lighter and distinctively greyer, with significant visible opacity.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 9005 Jet Black Paint

For RAL 9005 Jet Black, when is the standard RAL reference sufficient and when should I send a sample or OEM powder code?

RAL 9005 defines the color target, not the coating process. Sheen, texture, and chemistry drive how the finish looks in use.

Use the standard RAL 9005 match when:

  • Coordinating across different materials where textures/sheens already differ.
  • Low-criticality repairs (small chips, functional protection).
  • Close visual harmony is acceptable and inspection criteria are not strict.

Send an existing part or OEM powder code when:

  • High-visibility cosmetic panels or large-area repaints.
  • Strict acceptance/inspection requirements or side-by-side comparisons.
  • Matching an existing coated lot (especially textured or low-gloss powder).
  • You have a known OEM powder code (brand/series/gloss) that must be matched.

What to provide with the order/sample:

  • Reference: "RAL 9005 Jet Black."
  • Desired gloss range (e.g., matte, satin, high-gloss or 60 degrees gloss units if known) and any texture requirement.
  • Substrate and application method (powder vs. liquid) and service environment.
  • If sending a part, supply a flat area at least 25-50 mm square whenever possible.

Acceptance note: If you supply a sample or OEM code, approval and acceptance should be based on that reference rather than the generic RAL swatch. This reduces rework risk.

How do I avoid ordering the wrong black when I need RAL 9005 Jet Black?

Several RAL blacks have similar names and numbers (e.g., RAL 9005 Jet Black, RAL 9004 Signal Black, RAL 9017 Traffic Black). To avoid mix-ups:

  • Always confirm the full numeric code "RAL 9005" on the drawing or PO; do not rely on the name alone.
  • Watch for non-RAL vendor codes that resemble RAL numbers (e.g., internal codes like JB-9005 are not RAL).
  • If a document says only "Jet Black," verify it is RAL 9005 before ordering.
  • Check any specified gloss or texture; finish level is not encoded in the RAL number.
  • Quick check: RAL 9005 has very low LRV (~0.47). If you have a data sheet stating a much higher LRV, it may not be RAL 9005.

When in doubt, request clarification or provide a photo of the label/part and confirm the numeric RAL code before production.

What should I expect when using RAL 9005 Jet Black for field touch-up of a factory powder-coated part?

Touch-up with liquid RAL 9005 will restore protection and approximate color, but a seamless blend with factory powder is unlikely, especially when sheen or texture differ.

Plan and evaluate accordingly:

  • Match finish level: choose a gloss level that best matches the existing surface; textured powders will not visually disappear when touched up with smooth liquid paint.
  • Prep: clean, degloss/feather edges, and prime as required by the substrate and system.
  • Apply light coats and confine the repair to the smallest practical area; avoid flooding that highlights sheen differences.
  • Assess in service lighting; expect some visibility on large, uniform panels.

If acceptance is critical, the surface is high-visibility, or the existing coating has aged/faded, base the order on an actual part sample or the OEM powder code rather than the generic RAL reference.

When will I receive my paint matching RAL9005 Jet Black? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL9005 Jet Black, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL9005 Jet Black for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL9005 Jet Black is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL9005 Jet Black?
The RGB values for RAL9005 Jet Black are 10, 12, 16 and the HEX code is #0A0C10. The LRV for RAL9005 Jet Black is 0.47. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL9005 Jet Black made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL9005 Jet Black enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL9005 Jet Black?
Many types of paint are available for RAL9005 Jet Black with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL9005 Jet Black?
The RAL9005 Jet Black is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL9005 Jet Black?
The need for primer for RAL9005 Jet Black depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL9005 Jet Black to a different color from another paint company?

While we can provide RAL9005 Jet Black in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.