RAL 7040 Window Grey Paint

Use standard RAL 7040 Window Grey when the acceptance reference is the RAL Classic standard (fan deck/standard panel) rather than an existing part. This is typically appropriate for cross-material coordination, field touch-up of small chips, and situations where close visual harmony is sufficient.

• Standard OK if: the drawing simply states "RAL 7040," no OEM powder code is specified, inspection will compare to the RAL standard, or parts will not be viewed edge-to-edge with a benchmark part.
• Prefer custom/sample-based match if: the surface is high-visibility, a large area will be repainted, inspection will compare directly to an existing coated part, or an OEM powder code/finish (including gloss/texture) is specified.

Next steps:

• For standard: order "RAL 7040 Window Grey" and select sheen appropriate to your process. Note that the RAL code defines the color target only; gloss and texture are not defined.
• For custom: submit a physical sample or the exact OEM powder information (manufacturer, code, gloss, texture). The match will be made to that specific target, reducing acceptance risk against the installed part.

RAL 7040 defines the color, not the sheen. Select sheen based on how acceptance will be judged:

• If acceptance is to the RAL standard: document the sheen you require (e.g., matte, satin, semi-gloss, gloss). Color will be judged to the RAL target; gloss differences are acceptable if your spec allows them.
• If acceptance is to an existing coated part: match the sheen and texture as closely as possible. Provide a gloss range or reading if available (typical ranges: matte ~10-20 GU, satin ~30-40 GU, semi-gloss ~50-70 GU, gloss ~75+ GU at 60 degrees). Texture can change perceived gloss and color.
• If finish is unknown and criteria are strict: do not guess. Obtain a sample panel, a gloss reading, or send a representative part for a sample-based match before full order.

Color can match the RAL 7040 target, but appearance may differ because powder coats often have orange peel/texture and a specific gloss, while liquid touch-up is smoother. Under light, texture and gloss differences can make the same color appear lighter/darker or more/less saturated.

• Low-risk use: small chips, edges, fastener heads, or areas not viewed at grazing angles.
• Higher-risk use: large, flat, high-visibility panels or side-by-side comparisons with textured powder-coated parts.
• Mitigation: limit touch-up area, feather edges, apply thin coats, and verify on a test piece. For larger areas or strict cosmetic requirements, use the same powder process or request a sample-based match including the required gloss/texture.

Yes-standard RAL 7040 is commonly used for cross-material coordination where processes, textures, and sheens differ. This approach works when the goal is overall harmony, not identical appearance on adjacent, co-planar surfaces.

• Set acceptance to the RAL Classic standard (not to an existing part) to avoid unnecessary rejections caused by gloss/texture differences between materials.
• On purchase orders, specify "RAL 7040 per RAL Classic" and document the practical sheen for each material/process.
• If a uniform look is required across adjacent panels, avoid mixing processes; use the same coating system or provide a benchmark sample for a process-specific match.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL7040 Window Grey is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL7040 Window Grey enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL7040 Window Grey in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.