RAL 7035 Light Grey Paint

Use the standard RAL 7035 Light Grey (match to the official RAL Classic standard) when:

• Cross-material coordination is needed and textures/sheens already differ (e.g., plastic, metal, touch-up paint near a textured powder coat).
• Low-criticality repairs where functional protection is primary and close visual harmony is acceptable.
• Components are not side-by-side with legacy parts or under strict cosmetic inspection.

Request a match to your existing coated part or OEM powder code when:

• High-visibility, large-area surfaces or adjacent panels must look uniform.
• Customer inspection is strict or acceptance is judged against an installed part.
• An OEM powder code exists that the assembly must align with.

Key risks if you choose the wrong path:

• Powder vs liquid systems can differ in sheen/texture, making the same RAL color appear different.
• Visual acceptance often fails when the requirement is actually "match our existing part," not "match the RAL standard."

Actions to de-risk:

• Confirm the acceptance target: RAL standard card vs an existing part.
• If matching a part, send a coated sample or specify the OEM powder code, desired sheen range, and texture; request a spray-out for approval.

Include details that define both the color target and the coating build so you can reproduce and inspect reliably:

• Color target: "RAL 7035 Light Grey per RAL Classic" or "Match to customer-supplied part [ID]" (choose one).
• Coating system: product type/resin (e.g., epoxy, urethane), solvent/waterborne, and catalyst/reducer if applicable.
• Sheen/gloss: target gloss units and acceptable range; specify measurement angle used by your QC.
• Texture: smooth, fine texture, wrinkle, etc.
• Substrate and primer: material, pretreatment, primer product, and any required dry film thickness (DFT).
• Application: spray method, number of coats, flash times, and cure/bake schedule.
• Acceptance method: compare to RAL standard or to approved sample panel/part; note lighting/inspection conditions used by your team.
• Traceability: supplier, product codes, lot/batch numbers, order date, and retained control panel for future reference.

First define the acceptance target:

• If acceptance is against the RAL standard, choose the sheen needed for your service environment and document the gloss range.
• If acceptance is against an existing part, match the sheen and texture of that part; color will appear different if gloss/texture differs.

Operational guidance:

• Measure or obtain the current finish's gloss units and texture description before ordering.
• For touch-up of textured or matte powder coats, a lower-sheen liquid often blends better functionally, but do not expect an exact visual match.
• For high-visibility areas or adjacent panels, specify the gloss range and texture upfront and approve a spray-out panel before release.

Risk to manage: Differences in sheen can make RAL 7035 Light Grey look lighter/darker even when the pigment match is correct. Define sheen/texture in the PO and QC criteria to avoid rejection.

"RAL 7035 Light Grey" defines the color target against the RAL standard. It does not define coating type, sheen, texture, or process. Before ordering, clarify and document:

• Acceptance target: match to the RAL standard card or match to an existing coated part/OEM powder code.
• Coating system: powder vs liquid, resin type, and any performance requirements your project needs.
• Sheen/gloss range and texture.
• Substrate, pretreatment, primer, and required film build/cure.
• Inspection method and who approves (e.g., visual compare to standard vs approved sample panel).

If parts will sit next to existing RAL 7035 components, avoid ordering a generic RAL product without confirming sheen/texture or obtaining a sample-based approval.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL7035 Light Grey is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL7035 Light Grey enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL7035 Light Grey in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.