Looking for color by Hex, RGB, CMYK, or Lab?

RAL 7013 Brown Grey Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL7013 Brown Grey is a deep, muted brown-grey standardized for industrial and maintenance settings where visual neutrality and low reflectance are necessary. It offers a functional, subdued appearance with low visibility, making it suitable for technical and utilitarian uses.

This color features a very dark appearance with L = 33.28 and LRV = 7.67, resulting in low-light reflectance; it can look nearly black in dim conditions. Its warm-neutral tone, indicated by a* = 1.06 and b* = 8.26 with a hue angle of 82.69 degrees, provides subtle earthy brown warmth yet remains close to neutral. The chroma of 8.33 confirms its muted and restrained saturation, while the overall effect stays neutral for broad practical use. Gloss finishes will increase perceived depth and warmth; matte finishes will reinforce a more utilitarian, neutral look.

Digital approximations
Values
HEX: #554D41
RGB: 85, 77, 65
LAB: 33.3, 1.1, 8.3
Insights
- With an L value of 33.3 and LRV of 7.67, the color is distinctly dark and absorbs most incident light.
- The b value of 8.3 and low chroma (8.33) keep it muted with only the faintest earthy warmth, limiting obvious color shifts.
- RGB values (85, 77, 65) reflect its balance between warm brown and grey, neither reading as distinctly colored nor fully neutral.
Digital values are approximations. Paint appearance varies by finish and lighting.

Similar colors:
- Tiger Drylac™ 09/71410 RAL 7012 Basalt Grey: Cooler and slightly lighter, more distinctly grey rather than brown-tinged.
- RAL 7016 Anthracite Grey Paint Anthracite Grey: Darker and more neutral, with less brown warmth.
- RAL 7006 Beige Grey Paint Beige Grey: Noticeably lighter and more chromatic, with stronger beige notes.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 7013 Brown Grey Paint

For RAL 7013 Brown Grey, when is the standard RAL 7013 reference sufficient and when should I send a sample for custom matching?

Use the standard RAL 7013 Brown Grey when:

  • Cross-material coordination is acceptable (powder vs. liquid) and only close visual harmony is required.
  • Repairs are low criticality (small chips/edges) and protection is the priority.
  • No formal inspection tolerances are specified and acceptance is visual under typical site lighting.

Send a physical sample or provide the OEM powder code when:

  • You must match an existing coated part or batch (adjacent replacements, large continuous areas).
  • High-visibility surfaces or strict acceptance criteria apply (defined color tolerance or gloss range).
  • The original finish has a specific texture or gloss, or you know the exact powder brand/code.
  • Existing parts are aged/discolored; the standard reference will not account for weathering.

Important: A RAL code defines a color target, not the finish. Exact equivalence to unknown or aged coatings cannot be guaranteed, especially across different gloss levels, textures, or lighting. If sending a sample, provide a flat, clean area (>=25 mm), note the required sheen (60 degrees gloss units) and texture, and state the lighting for acceptance (e.g., D65/5000-6500 K).

How can I confirm I am ordering RAL 7013 Brown Grey and not a similar RAL grey?
  • Verify the full four-digit code and official name on your spec/PO: "RAL 7013 Brown Grey."
  • Confirm the system: RAL Classic uses four digits (e.g., 7013). Do not substitute RAL Design or RAL Effect numbers.
  • Watch common mix-ups: RAL 7012 Basalt Grey, 7015 Slate Grey, 7016 Anthracite Grey, and 7008 Khaki Grey are different from 7013.
  • Record finish separately: the RAL code is the color target only. Specify sheen (60 degrees GU) and any texture in the order.
  • If replacing parts, check the original paperwork for an OEM powder code; provide it or send a sample if exact batch alignment is required.
What sheen should I order for RAL 7013 Brown Grey to pass acceptance against an existing finish?
  • If acceptance compares to an installed part: measure the part's 60 degrees gloss and order RAL 7013 in that sheen (target within ±5 GU). If measurement is not possible, send a sample or specify the OEM powder code.
  • If acceptance is visual only and materials differ (powder vs. liquid): a satin/mid-gloss is often least conspicuous, but expect minor appearance shifts. Evaluate under the project lighting.
  • Gloss and texture affect perceived color: higher gloss can make RAL 7013 appear darker; texture can lighten/darken. Do not change the color code to compensate-match the finish.
  • Define acceptance conditions on the PO: color (RAL 7013), sheen (60 degrees GU), texture, and inspection lighting (e.g., D65/5000-6500 K).
What surface prep is required to touch up a powder-coated item in RAL 7013 Brown Grey?
  • Identify substrate and confirm the existing coating is sound. Remove loose coating and corrosion; feather edges.
  • Clean thoroughly with detergent and/or solvent degreaser; rinse and dry. Residues can cause color/adhesion issues.
  • De-gloss/scuff the repair area (typically 320-600 grit) to promote adhesion; wipe clean.
  • Prime any bare metal with a compatible primer for the substrate (e.g., steel vs. aluminum/galvanized). Allow proper dry time.
  • Mask, then apply RAL 7013 in light coats, observing the product's temperature/humidity and recoat intervals. Blend edges.
  • Expect sheen/texture differences versus the original powder coat; this can change perceived color under certain lighting. For high-visibility areas, consider sending a sample for a custom finish match.
When will I receive my paint matching RAL7013 Brown Grey? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL7013 Brown Grey, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL7013 Brown Grey for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL7013 Brown Grey is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL7013 Brown Grey?
The RGB values for RAL7013 Brown Grey are 85, 77, 65 and the HEX code is #554D41. The LRV for RAL7013 Brown Grey is 7.67. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL7013 Brown Grey made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL7013 Brown Grey enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL7013 Brown Grey?
Many types of paint are available for RAL7013 Brown Grey with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL7013 Brown Grey?
The RAL7013 Brown Grey is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL7013 Brown Grey?
The need for primer for RAL7013 Brown Grey depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL7013 Brown Grey to a different color from another paint company?

While we can provide RAL7013 Brown Grey in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.