Looking for color by Hex, RGB, CMYK, or Lab?

RAL 6027 Light Green Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL6027 Light Green features a distinctive, moderately light aqua-green character, providing a clean, technical, and identifiable look with a cool-leaning tone and moderate brightness. Its LAB L* of 71.09 and LRV of 42.32 make it brighter than mid-tones without approaching pastel territory. The LAB a* of -21.33 and b* of -3.79 place it clearly in the aqua-green zone, with a slight bias toward blue. Chroma at 21.66 ensures noticeable saturation without reaching fluorescent intensity, and a strong negative a* with mild negative b* result in a light turquoise or green-cyan undertone. Gloss level impacts both brightness and color vividness, while matte finishes offer a more subdued appearance, making the finish an important factor for final results.

RAL6027 is typically chosen where standout color is needed but boldness is not required, especially in technical or industrial situations demanding legibility, differentiation, or recognition. Applications include identification and safety marking on machinery, equipment, piping, and functional color coding, as well as clear demarcation for building elements like handrails and barriers. Common for touch-up and maintenance of OEM components originally coated to RAL standards, it also supports cross-material coordination when matching existing RAL6027 finishes. Its mid-light value and chroma provide effectiveness across lighting conditions, with gloss influencing perceived vividness. For critical harmony across materials and finishes, referencing an existing sample or pre-testing is advised due to potential application or substrate shifts.

Digital approximations
Values
HEX: #7AB9B4
RGB: 122, 185, 180
LAB: 71.1, -21.3, -3.8
Insights
- The LAB L* value (71.1) and LRV (42.32) indicate moderate reflectance, ensuring good visual clarity without excessive brightness.
- The strong negative a* (-21.3) and mild negative b* (-3.8) signal a distinctly cool, aqua profile, more blue than a standard green.
- RGB balance (G>B>R) reinforces the tendency toward a blue-green rather than a grass green.
Digital values are approximations. Paint appearance varies by finish and lighting.

Similar colors:
- RAL 6019 Pastel Green Paint Pastel Green - noticeably lighter, softer, and less saturated
- RAL 6034 Pastel Turquoise Paint Pastel Turquoise - slightly lighter and bluer, for a cooler effect
- Jotun™ 1025625 RAL 5018 Turquoise Blue - darker and more intensely chromatic, heavier blue influence

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 6027 Light Green Paint

For RAL 6027 Light Green, when is a standard RAL match acceptable and when should I match to my specific coated part?

RAL 6027 Light Green defines a color target, not a coating process. Decide your acceptance target before ordering.

Use a standard RAL 6027 match when:

  • Acceptance will be compared to a RAL reference (not to an existing part).
  • Cross-material coordination where textures/sheens already differ.
  • Low-criticality repairs (small chips, functional protection).
  • Close visual harmony is sufficient and minor gloss/texture differences are acceptable.

Request a sample-based or OEM powder match when:

  • High-visibility cosmetic surfaces or large-area repaints.
  • Inspection will compare to an existing coated part or assembly.
  • Strict acceptance tolerances are specified (color and gloss/texture).
  • You have an OEM/powder supplier code for RAL 6027 with defined gloss/texture.

Acceptance risks to consider:

  • Standard RAL 6027 in liquid vs powder may differ in gloss/texture and perceived hue.
  • Aged/UV-shifted parts will not match the RAL standard without a sample match.

To avoid rework, state the acceptance target on the PO: for example, "RAL 6027 to the RAL standard" or "RAL 6027 matched to provided sample/OEM powder code, gloss/texture as specified."

Can I apply RAL 6027 Light Green over existing powder coat or paint, and what prep is required?

Yes, RAL 6027 Light Green can be applied over sound powder coat or paint with proper surface preparation.

Recommended process:

  • Clean: Remove oils, dirt, and silicone with detergent and water; rinse and dry. Follow with a compatible solvent wipe.
  • Scuff/degloss: Uniformly scuff the surface (approx. 220-400 grit depending on texture) to create a mechanical profile. Feather any edges.
  • Prime as needed: Spot-prime any bare metal; use an adhesion promoter for difficult plastics.
  • Test: Do a small test area. After cure, perform a tape pull or crosshatch test to confirm adhesion.
  • Topcoat: Apply light, even coats. Observe recoat and cure times.

Compatibility cautions:

  • Some low-surface-energy or silicone-modified powders resist overcoating-testing is essential.
  • Overcoating baked powder may not replicate the original texture/gloss; this is usually acceptable for small repairs but may be noticeable on large areas.

If the area is large or cosmetic acceptance is strict, consider stripping/recoating or ordering a match to the existing part including gloss/texture.

Which sheen should I order for RAL 6027 Light Green to meet inspection requirements?

RAL 6027 specifies color only. Sheen must be defined to meet inspection.

Select sheen based on acceptance target:

  • If inspected against a RAL reference card: Confirm the reference type (e.g., gloss vs semi-matt) and match that sheen.
  • If inspected against an existing coated part: Measure gloss in gloss units (60 degrees) and match that value and texture. If you cannot measure, provide the OEM/powder code and stated gloss, or send a sample.
  • If acceptance is color-only across mixed materials: Exact sheen alignment is typically not required, but document the chosen sheen to avoid disputes.

Typical ranges for communication (60 degrees): matte ~10-20 GU, satin ~25-35 GU, semi-gloss ~45-65 GU, gloss ~70+ GU. Texture lowers apparent gloss; match texture where it affects acceptance.

To avoid rejection, include on your PO: "RAL 6027 Light Green, target gloss __ GU @60 degrees, texture __ (e.g., smooth/texture), acceptance vs [RAL card / sample / OEM code]."

When will I receive my paint matching RAL6027 Light Green? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL6027 Light Green, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL6027 Light Green for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL6027 Light Green is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL6027 Light Green?
The RGB values for RAL6027 Light Green are 122, 185, 180 and the HEX code is #7AB9B4. The LRV for RAL6027 Light Green is 42.18. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL6027 Light Green made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL6027 Light Green enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL6027 Light Green?
Many types of paint are available for RAL6027 Light Green with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL6027 Light Green?
The RAL6027 Light Green is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL6027 Light Green?
The need for primer for RAL6027 Light Green depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL6027 Light Green to a different color from another paint company?

While we can provide RAL6027 Light Green in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.