Looking for color by Hex, RGB, CMYK, or Lab?

RAL 3012 Beige Red Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL3012 Beige Red is a mid-light beige red with moderate saturation, well-suited for functional or coordinated industrial finishes. The color is grounded in the RAL Classic system and delivers a muted red, technical, and practical feel with low-glare properties. It features a CIE L value of 61.8 and an LRV of 30.17, placing it above midtone without sliding into extremes. With a warm tendency (a=21.96, b=22.62, hue angle 45.85), RAL3012 sits between red and yellow, while its moderate to moderately high chroma (31.53) makes it neither strongly pastel nor overpowering for industrial settings. The undertone is muted terra-cotta or beige-red. The color deepens slightly as gloss increases, but the undertone and warmth remain stable.

RAL3012 Beige Red is used for industrial equipment housings, machine parts needing a warm signal color, powder coating for architectural trim, repainting or touch-up to match RAL specs, and facility coding requiring color distinction without visual aggression. It's selected for environments where a clear, warm red is required-noticeable but not overpowering. The LRV of 30.17 provides visibility for coding and safety while retaining a restrained presence. The color responds to its environment: warm light enhances its beige undertone; cool light mutes the warmth.

Digital approximations
Values
HEX: #C6866E
RGB: 198, 134, 110
LAB: 61.8, 22.0, 22.6
Insights
- LRV of 30.17 indicates only moderate reflectance, so it will not read as either very dark or very light in digital mockups.
- The high chroma (31.53) and moderate red (a=22.0) and yellow (b=22.6) values create a distinctly warm, muted terracotta tone.
- Digital RGB values (198, 134, 110) yield a color that is easily differentiated from standard beige or pale browns, supporting clear identification in rendering or interface design.
Digital values are approximations.
Paint appearance varies by finish and lighting.

Similar colors:
- RAL 3014 Antique Pink Paint: Cooler and slightly lighter, with more pinkish undertones.
- RAL 8004 Copper Brown Paint: Darker and more brown, less vivid and less light-reflective.
- RAL 3013 Tomato Red Paint: Stronger chroma and significantly deeper, with more pronounced red overtones.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 3012 Beige Red Paint

When should we send a sample instead of ordering a standard RAL 3012 Beige Red?

RAL 3012 Beige Red is a standardized color target, not a coating process. Order a standard RAL reproduction when your acceptance will be against the RAL reference and minor differences in gloss/texture are acceptable.

Use a standard RAL 3012 Beige Red match when:

  • Cross-material coordination (e.g., metal to plastic) where textures/sheens already differ.
  • Low-criticality repairs (small chips, functional protection).
  • Acceptance will be judged against the RAL standard under typical lighting.

Send a physical sample or provide an OEM powder code when:

  • You must match an existing coated part (especially if aged or from a specific powder line).
  • High-visibility surfaces, large-area repaints, or strict inspection criteria apply.
  • Gloss/texture must align with installed parts (powder vs liquid differences matter).

What to include with a sample request:

  • A representative coated part or panel (minimum ~1×2 in), note the required gloss level and any texture.
  • How acceptance will be judged (match to the part vs match to RAL standard) and viewing conditions.

Choosing the right path reduces rework: standard RAL is fastest; sample/OEM-based matching adds lead time but lowers rejection risk when appearance must match an existing finish.

Why might liquid paint look different from our RAL 3012 Beige Red powder coat?

Powder coatings often have orange peel/texture and a defined gloss. Liquid paints can be smoother and can be ordered in various gloss levels. Texture and gloss change how RAL 3012 Beige Red is perceived due to surface reflectance, so two coatings matched to the same RAL color can look different sidebyside.

To reduce visible mismatch:

  • Specify the gloss level you need when ordering the liquid paint.
  • Define acceptance: match to the RAL standard or to your existing part (these are different targets).
  • Evaluate under the lighting used for inspection/installation; lighting shifts perception.
  • If you need to match the existing powder appearance closely, send a sample for a sprayed-out, gloss-targeted match.

Note: Liquid coatings generally cannot replicate heavy powder texture; alignment focuses on color and gloss.

How should we prep and apply RAL 3012 Beige Red for small repairs to avoid failure?

For reliable touch-up of RAL 3012 Beige Red:

  • Verify substrate and existing coating; test a small area for compatibility if uncertain.
  • Clean: remove rust/loose paint; wash with detergent, rinse, dry; solvent-wipe with IPA or acetone to remove oils/silicone.
  • Scuff: de-gloss surrounding area with 320-600 grit; feather paint edges smoothly.
  • Prime: spot-prime bare metal with a compatible primer (e.g., epoxy/anti-corrosive); use adhesion promoter for plastics as needed. Let dry per TDS.
  • Apply topcoat: shake/mix thoroughly; spray light, even coats with proper flash times. Aim to finish at a panel break when possible for blends.
  • Conditions: 60-90 degreesF and <85% RH. Allow full cure before service.
  • Acceptance: color may differ from aged/faded parts; if an appearance match to the existing surface is critical, submit a sample for a custom match.
When will I receive my paint matching RAL3012 Beige Red? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL3012 Beige Red, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL3012 Beige Red for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL3012 Beige Red is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL3012 Beige Red?
The RGB values for RAL3012 Beige Red are 198, 134, 110 and the HEX code is #C6866E. The LRV for RAL3012 Beige Red is 30.17. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL3012 Beige Red made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL3012 Beige Red enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL3012 Beige Red?
Many types of paint are available for RAL3012 Beige Red with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL3012 Beige Red?
The RAL3012 Beige Red is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL3012 Beige Red?
The need for primer for RAL3012 Beige Red depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL3012 Beige Red to a different color from another paint company?

While we can provide RAL3012 Beige Red in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.