70% of Orders Ship within 3 Business Days.
RAL 1027 Curry Paint
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Copy below code in your post
Ready to purchase? Select your options in the 4 steps below.
RAL1027 Curry is a deep, vivid yellow-orange with strong chroma, recognized for its robust, attention-getting, and earthy character. Its moderately deep lightness (L = 55.6, LRV = 23.52) gives it a strong mid-tone presence, darker than pastel yellows. The color is distinctly warm, with a yellow-orange bias and a high chroma (60.16), resulting in a saturated appearance that stands out in industrial and architectural settings. Gloss finishes amplify vibrancy and depth, while matte surfaces subtly reduce intensity.
Common uses include safety marking, industrial identification, machinery maintenance, logistics and transport equipment, architectural accents (such as bollards, doors, and posts), and standardized color coding on pipework or safety rails. RAL1027 Curry is chosen for scenarios requiring high visibility and a clear identity without excessive brightness. Its moderate depth helps conceal dirt compared to light yellows. High-gloss increases richness; matte finishes subdue the color. Under cool lighting, the color may read slightly browner.
Digital approximations
Values
HEX: #A97F08
RGB: 169, 127, 8
LAB: 55.6, 6.9, 59.8
Insights
- L = 55.6 and LRV = 23.52 confirm this is a mid-to-dark yellow, visually more substantial than standard yellows.
- Chroma 60.16 and b = 59.8 together drive the vivid, highly visible impact; readily distinguishable from drab or less saturated hues.
- The strong yellow component (b value) means this color consistently appears warm and bold, regardless of digital device differences.
Digital values are approximations.
Paint appearance varies by finish and lighting.
Similar colors:
- RAL 1003 Signal Yellow Paint Signal Yellow: lighter and more chromatic, leaning toward pure yellow rather than yellow-orange.
- RAL 1021 Rapeseed Yellow Paint Colza Yellow: brighter and higher LRV, with less orange/red warmth-reads cleaner and less earthy.
- RAL 1032 Broom Yellow Paint Broom Yellow: slightly cooler and less deep, lacking some of RAL1027's robust, strong presence.
Common uses include safety marking, industrial identification, machinery maintenance, logistics and transport equipment, architectural accents (such as bollards, doors, and posts), and standardized color coding on pipework or safety rails. RAL1027 Curry is chosen for scenarios requiring high visibility and a clear identity without excessive brightness. Its moderate depth helps conceal dirt compared to light yellows. High-gloss increases richness; matte finishes subdue the color. Under cool lighting, the color may read slightly browner.
Digital approximations
Values
HEX: #A97F08
RGB: 169, 127, 8
LAB: 55.6, 6.9, 59.8
Insights
- L = 55.6 and LRV = 23.52 confirm this is a mid-to-dark yellow, visually more substantial than standard yellows.
- Chroma 60.16 and b = 59.8 together drive the vivid, highly visible impact; readily distinguishable from drab or less saturated hues.
- The strong yellow component (b value) means this color consistently appears warm and bold, regardless of digital device differences.
Digital values are approximations.
Paint appearance varies by finish and lighting.
Similar colors:
- RAL 1003 Signal Yellow Paint Signal Yellow: lighter and more chromatic, leaning toward pure yellow rather than yellow-orange.
- RAL 1021 Rapeseed Yellow Paint Colza Yellow: brighter and higher LRV, with less orange/red warmth-reads cleaner and less earthy.
- RAL 1032 Broom Yellow Paint Broom Yellow: slightly cooler and less deep, lacking some of RAL1027's robust, strong presence.
Product Data
About RAL
RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.
Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.
Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.
RAL CLASSIC © RAL, Bonn 2019.
RAL DESIGN SYSTEM © RAL, Bonn 2019.
RAL EFFECT © RAL, Bonn 2019.
RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.
Frequently Asked Questions About RAL 1027 Curry Paint
For RAL 1027 Curry, when is ordering the standard RAL color sufficient versus matching my specific coated part?
Use RAL 1027 Curry as a standard reference when the specification accepts the RAL standard color target, not your existing part. Choose a sample- or OEM-based match when acceptance will be judged against an existing coating.
- Standard RAL is typically sufficient when:
- The drawing simply says "RAL 1027 Curry" and inspection will be against the RAL standard under neutral lighting.
- You are coordinating across different materials where sheen/texture already vary, or you're doing small, low-criticality touch-ups.
- Request a sample/OEM match when:
- Acceptance is side-by-side against an existing part (especially powder coat with defined texture or gloss).
- It's a high-visibility surface or large-area repaint with strict cosmetic acceptance.
- A known OEM powder coating code exists; provide that code plus gloss/texture requirements.
- To reduce risk, specify:
- Target: "Match RAL 1027 Curry standard" or "Match existing coated part."
- Sheen: 60 degrees gloss units (e.g., 20 GU matte, 30 GU satin, 60 GU semi-gloss, 80+ GU gloss) and any texture description.
- Coating type/substrate: liquid vs powder, resin/system, and substrate.
- Inspection lighting: define viewing conditions (e.g., D65/daylight); note that warm LED can shift appearance.
- Best practice for strict acceptance: request a test panel/drawdown for approval before production.
What sheen should I order for RAL 1027 Curry to meet acceptance criteria?
RAL defines the color target, not the sheen. For acceptance, align the sheen with what the finish will be compared to.
- If acceptance is against an existing part: match its gloss level. Measure 60 degrees gloss units if possible. As a guide: matte ~10-20 GU, satin ~20-35 GU, semi-gloss ~35-70 GU, gloss >70 GU. A gloss mismatch of ~10 GU or more is commonly noticeable, especially under direct light.
- If acceptance is against the RAL standard/fan: state that criterion and specify a sheen range allowed for acceptance (e.g., 25-35 GU satin), since fan chips and coatings may not share the same gloss.
- Textured finishes: specify both texture and gloss. Measure gloss on a representative flat area, or provide a part for match. Texture can make the same color appear duller.
- Lighting: verify sheen and color under the intended inspection lighting (e.g., daylight/D65). Different lighting can change perceived gloss and color.
Can I use RAL 1027 Curry for a quick repair now and plan a precise match later?
Yes. Treat standard RAL 1027 Curry as a functional stopgap for low-criticality touch-ups, and plan a sample- or OEM-based match for permanent, inspected work.
- Temporary fix (fast protection): use a touch-up bottle/pen or aerosol in RAL 1027 Curry for chips/edges. Expect possible differences in sheen/texture and some variation versus aged parts; this prioritizes protection and visual harmony, not strict cosmetic match.
- Permanent solution (strict acceptance): provide a sample part or OEM powder code, specify 60 degrees gloss units and texture, coating type, and substrate. Request a test panel and approve under site lighting before production.
- Transition plan: apply the temporary coating to arrest corrosion; in parallel, start the match workflow. Before final coating, confirm compatibility (or sand/prime) so the permanent system meets performance and appearance requirements.
When will I receive my paint matching RAL1027 Curry? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume.
Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL1027 Curry, typically ship within 1–2 business days. During peak periods, lead times may vary slightly.
Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline.
Learn more about paint production lead times.
Can I use RAL1027 Curry for touching up powder coating?
Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL1027 Curry is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.
Learn more about our color matching service.
What are the RGB, HEX and LRV values for RAL1027 Curry?
The RGB values for RAL1027 Curry are 170, 131, 45 and the HEX code is #AA832D. The LRV for RAL1027 Curry is 25.07. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL1027 Curry made of? And how much area will one can cover?
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL1027 Curry enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
How to buy paint for RAL1027 Curry?
Many types of paint are available for RAL1027 Curry with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL1027 Curry?
The RAL1027 Curry is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL1027 Curry?
The need for primer for RAL1027 Curry depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL1027 Curry to a different color from another paint company?
While we can provide RAL1027 Curry in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.
Color details
RGB: 170 131 45
HEX: #AA832D
LRV: 25.07%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
