Looking for color by Hex, RGB, CMYK, or Lab?

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application


White Sand is a very light, softly warm neutral with a pale beige-sand cast. It reads as an off-white rather than a crisp white, with low chroma and a slight yellow undertone that keeps it from looking cool or gray.

MyPerfectColor custom spray paint matched to the selected brand color can be used on practical small parts and fixtures such as PVC pipe, vent covers, switch plates, speaker grilles, shelf brackets, railings, mailbox hardware, and trim caps. Its muted character makes it a workable choice for pieces that need to coordinate with a light architectural color without drawing much attention to the part itself.

Because this is a very light color, coverage can be more sensitive to the substrate underneath it. Darker, patchy, or strongly colored surfaces may show through more easily, so surface prep, primer choice, and film build can affect how quickly the color evens out. Sheen also changes the read: glossier finishes can make the warm cast look a little brighter, while flatter finishes tend to soften it.

Similar colors:

7003-5 Caribbean Walk
7006-6 Polished Ivory
3005-10C Woodrow Wilson Linen

Product Data

About Valspar Paint

The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.

Matching Valspar Paint Colors

MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar 92-42A White Sand by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.

The colors shown on this website are computer video simulations of the Valspar 92-42A White Sand and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar 92-42A White Sand. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Valspar™ 92-42A White Sand *

Can I return a custom order for 92-42A White Sand by Valspar if the color is not what I expected?

Custom orders made as MyPerfectColor paint matched to 92-42A White Sand by Valspar should be confirmed carefully before you buy. Once a custom color match is made, it is generally not returnable or refundable, so verify the color reference, product type, sheen, and quantity before ordering.

Remember that MyPerfectColor is supplying its own paint matched to the selected brand color reference, not Valspar's original paint product.

Which finish should I choose for MyPerfectColor matched to 92-42A White Sand by Valspar?

Choose the finish based on how the item will be used and how much reflectivity you want. Lower-gloss finishes usually reduce shine and can make surface flaws less noticeable, while higher-gloss finishes are easier to wipe clean and often hold up better on parts that get handled or cleaned often.

Keep in mind that gloss level changes how 92-42A White Sand reads on the finished item. The same color match can look lighter or deeper depending on the sheen, texture, and substrate.

What projects work well for custom spray paint matched to 92-42A White Sand by Valspar?

MyPerfectColor custom spray paint matched to 92-42A White Sand by Valspar is a practical choice for small or awkward items that are hard to coat evenly with a brush. Common uses include trim details, fixtures, railings, vents, pipes, hardware, accessories, and other removable parts.

It is especially useful when you want the item itself to be color-coordinated to a known paint reference, rather than trying to paint a large area with a brush or roller.

How should I spray MyPerfectColor 92-42A White Sand by Valspar for a smoother result?

Apply light, even coats and keep the spray moving so the paint lands uniformly. Hold the can at a consistent distance, overlap each pass slightly, and avoid heavy passes that can cause runs, uneven sheen, or color build-up.

If you are coating a tricky substrate or a part with edges and cutouts, build coverage gradually instead of trying to finish in one wet coat. That usually gives a cleaner result for a match of 92-42A White Sand.

Where can I find the SDS for MyPerfectColor 92-42A White Sand by Valspar?

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the Valspar color name alone. To find the SDS for the product you are ordering, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you are comparing formats, check the SDS for the specific MyPerfectColor product type you plan to buy, since the information can differ by chemistry.

How quickly will I receive my paint matched to Valspar 92-42A White Sand?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Valspar 92-42A White Sand depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the Valspar 92-42A White Sand?
The RGB values for Valspar 92-42A White Sand are 241, 232, 214 and the HEX code is #F1E8D6. The LRV for Valspar 92-42A White Sand is 81.15. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to Valspar 92-42A White Sand? And how many spray cans do I need?

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 92-42A White Sand enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

What is the Hue Angle and Chroma for Valspar 92-42A White Sand?
The Hue Angle for Valspar 92-42A White Sand is 89.88 and the chroma is 9.67. The Hue Angle represents the position of a color's hue around a color wheel. The Chromacity represents the intensity of a hue. Learn more about browsing colors by hue.
Does Valspar paint color Valspar 92-42A White Sand need primer?
MyPerfectColor doesn't sell Valspar paint, but it does match the Valspar 92-42A White Sand and all the other Valspar colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How can MyPerfectColor color match the Valspar 92-42A White Sand in paint?

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 92-42A White Sand you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

How do I convert Valspar 92-42A White Sand to a different color from another paint company?

While we can provide Valspar 92-42A White Sand in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.