Match of Valspar™ 226-3 Sprout *

For spray paint matched to Valspar 226-3 Sprout, dry-to-touch is typically within minutes, recoat is usually in 1 to 2 hours, and full cure is about 2 weeks. Those are different milestones, so do not treat a dry surface as fully cured.

If you need to mask, assemble, or put the part back into service, wait for the coating to reach the level needed for your project. Temperature, film thickness, and surface type can all change the real-world timing.

Yes, MyPerfectColor spray paint matched to Valspar 226-3 Sprout can be used on many plastics, but plastics vary a lot. Test on the actual part first if the item matters or if you are unsure what type of plastic it is.

For better adhesion on difficult plastic surfaces, use the MyPerfectColor primer for acrylic enamel before applying the color coat. Proper cleaning and surface prep are important because smooth or low-energy plastics can reduce bond strength.

Confirm Valspar 226-3 Sprout from a physical swatch, labeled sample, or another known original brand color reference before you order. Screen images can shift with lighting, display settings, and device calibration, so they are not reliable enough for final approval.

MyPerfectColor makes a custom match to the selected brand color reference, so the target color needs to be verified first. That helps reduce the risk of ordering the wrong color match.

Choose the sheen based on how the part will be used, cleaned, and viewed, not on the color name alone. For a match of Valspar 226-3 Sprout, gloss level changes both durability and how the color reads on the finished item.

Higher-sheen finishes usually clean more easily and reflect more light, while flatter finishes can reduce reflection but may be less forgiving to wear. If you are coating a part next to an existing painted surface, match the sheen carefully because the same color can look different at different gloss levels.

Before applying a match of Valspar 226-3 Sprout on metal or over an existing coating, clean the surface, remove contamination, and scuff it if the finish is sound. If there is rust, peeling paint, or loose material, those issues should be addressed first because they can affect adhesion and appearance.

Gloss, texture, and the condition of the old coating can change how the new color reads. If you are coating a repair area beside older paint, a test application is a practical way to check adhesion and appearance before finishing the whole part.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 226-3 Sprout enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 226-3 Sprout you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 226-3 Sprout in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.