Match of Valspar™ 248-5 Remembrance *

Coverage depends on the size of the item or surface, the texture, the hiding power of the color over the existing surface, the application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover about 400 to 600 square feet, depending on the product format.

If you are coating a part with edges, recesses, or a rough surface, plan on using more material than a smooth, flat surface of the same size. If the base color is dark or uneven, you may also need extra coats to get an even result in 248-5 Remembrance.

Yes, MyPerfectColor spray paint matched to Valspar 248-5 Remembrance can work on many plastics, but plastic types vary a lot, so test on the actual part before painting the full item. Surface preparation matters, and some plastics may need a primer to improve adhesion.

For the best decision, use the MyPerfectColor primer for Acrylic Enamel when the plastic is difficult or when you want extra adhesion help. That is especially useful for removable parts, fixtures, and other items where a reliable bond matters more than speed.

Choose the finish based on how the item will be used, how much wear it will see, and how much reflectivity you want. Higher-gloss finishes usually clean more easily and can feel more durable, while lower-sheen finishes reduce shine. The sheen also changes how 248-5 Remembrance reads on the finished item.

If you are coating a practical part such as hardware, a vent, a cover, or another handled surface, think about cleanup and durability first, then appearance. The same color match can look different once the sheen changes, even though the color formula is still matched to the selected reference.

No. Once a match of Valspar 248-5 Remembrance is applied, lighting, placement, sheen, and nearby surfaces can still change how it looks on the finished item. That is normal for any painted part, especially when the piece will sit near another existing surface.

If the item will be seen under daylight, indoor lighting, or mixed lighting, evaluate the result in the conditions where it will actually be used. Small differences can be more noticeable on parts that sit directly beside an older painted surface.

MyPerfectColor spray paint matched to Valspar 248-5 Remembrance is typically dry to the touch within minutes. It should be recoated in about 1 to 2 hours, and it is fully cured in about two weeks.

Do not treat dry-to-touch as fully cured. If the part needs handling, assembly, or final installation, allow enough time for the coating to harden before putting the item into service.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 248-5 Remembrance enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 248-5 Remembrance you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 248-5 Remembrance in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.