Match of Valspar™ 344A-2 Wet Dock *

Confirm 344A-2 Wet Dock from a physical Valspar swatch or another known color reference, not from a screen image alone. MyPerfectColor makes a custom match to the selected Valspar color reference, so the target color should be verified before you order.

If you are matching an existing painted part, compare against the original reference color whenever possible. Color can look different because of aging, sheen, and lighting, so the code by itself does not guarantee the appearance of the item you are trying to match.

Choose the finish based on how the item will be used, how much cleaning it needs, and how much reflectivity you want on the finished surface. A gloss finish is usually easier to clean and more reflective, while lower-sheen finishes reduce reflectivity and can make surface texture less noticeable.

The same 344A-2 Wet Dock color can look different in different sheens, so try to match the finish of the item or nearby surfaces if appearance consistency matters. If you are unsure, pick the finish that best fits the application rather than the color name alone.

For metal or an already painted surface, clean off dirt, oil, wax, and other contamination first. Remove rust and loose coating, then scuff any sound glossy finish so the new coating has a better surface to grip.

The condition of the old coating can affect how 344A-2 Wet Dock looks and performs after application. A smooth, stable base usually gives better results than a peeling or uneven surface, and testing on the actual part is a good way to check adhesion before committing to the full project.

Yes, 344A-2 Wet Dock can be used on many plastic parts, but plastics vary widely, so testing on the actual material is important. Clean the part well and scuff it lightly if the surface allows, especially if it is smooth or glossy.

MyPerfectColor spray paint adheres well to most plastics, but using the MyPerfectColor primer can improve adhesion on difficult or low-energy surfaces. If the plastic is flexible, highly slick, or unknown, a test spot is the safest way to check how the color and coating will behave before you paint the whole item.

Coverage depends on the size of the item, the texture of the surface, how much hiding power is needed, the application method, and how many coats you plan to apply. For spray paint, a typical can covers about 20 square feet with one coat.

If you are painting a textured, dark, or irregular surface, plan for extra material because more than one coat may be needed to get even coverage. For larger projects, estimate based on the full area and include room for test spraying and touch-up during application.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 344A-2 Wet Dock enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 344A-2 Wet Dock you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 344A-2 Wet Dock in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.