Match of Martha Stewart™ G20 Pongee *

Yes, MyPerfectColor custom spray paint matched to Martha Stewart G20 Pongee can be used on many plastic parts, but plastics vary a lot in how well they accept paint. For the best chance of adhesion, test on the actual plastic first and use a primer when the substrate is difficult to bond to. MyPerfectColor primer can improve adhesion before you apply the G20 Pongee match.

If the part is a low-energy or unknown plastic, a small test panel is the safest way to confirm prep and adhesion before you paint the final piece.

For Martha Stewart G20 Pongee custom spray paint, expect it to be dry to the touch within minutes under normal conditions. Recoat timing is usually 1 to 2 hours, depending on film build, temperature, and airflow. Full cure takes about two weeks.

That means dry to the touch is not the same as fully cured. You can plan your work around the recoat window, but allow the painted item to harden fully before expecting maximum durability.

Yes. MyPerfectColor custom spray paint matched to Martha Stewart G20 Pongee is a practical choice for small parts such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar hardware where a smooth spray finish is easier than brush application.

For these items, remove the part if possible, clean it well, and prep the surface before spraying. That helps the G20 Pongee match look more even and reduces the chance of visible edges or missed areas.

If multiple finish options are available for Martha Stewart G20 Pongee, choose based on how the part will be used and cleaned. Glossier finishes usually wipe down more easily and reflect more light, while flatter finishes reduce reflectivity and can be more forgiving on imperfect surfaces.

Keep in mind that the same G20 Pongee color can look different at different sheen levels. If the item will sit near an existing painted surface, try to match both the color and the finish as closely as possible.

The color reference for Martha Stewart G20 Pongee stays the same, but the finished appearance can still change with lighting, sheen, texture, and the surrounding surfaces. A match that looks correct in the shop or on a sample may read a little differently once it is on the actual part and placed in its final location.

If the painted item will be installed next to an existing surface, it is smart to test the G20 Pongee match on the actual substrate or on a sample piece in the same lighting before finishing the full project.

MyPerfectColor has an original sample of the Martha Stewart G20 Pongee in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While MyPerfectColor can provide paint matched to the Martha Stewart G20 Pongee, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.