Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ SRFS 21892 RAL 5005 Signal Blue *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings SRFS 21892 RAL 5005 Signal Blue is a medium-deep blue with a cool bias and a faint violet undertone. It reads as a clear, saturated blue rather than a muted navy, with enough depth to feel solid and enough chroma to stay distinctly blue.

This color is useful for touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots in the original finish. MyPerfectColor precisely matches the color and finish, which makes it practical for powder-coated frames, brackets, enclosures, railings, switch covers, screw heads, fastener caps, end caps, and replacement hardware that needs to coordinate with coated assemblies.

Because the color is fairly deep, repaired areas can show contrast at the edges if the substrate is uneven or if the repair is applied too lightly. Film build, surface prep, and sheen will affect the final reading, and a touched-up area beside an older cured finish may not disappear completely even when the color match is correct.

For fabrication and maintenance work, this reference can also be used for sample panels, accessory parts, and other paintable details that could not be finished in the original coating process. When matching an existing installed part, keep in mind that age, cure, texture, and gloss can shift the appearance of the original coating.

Similar colors:

PLSF 20064 / RAL 5005
PLSF20027 /Ral 5010 Gentian Blue
PLSF20064 /Ral 5005 Signal Blue

Frequently Asked Questions About Match of IFS Coatings™ SRFS 21892 RAL 5005 Signal Blue *

Will MyPerfectColor SRFS 21892 RAL 5005 Signal Blue match an existing cured part exactly?

MyPerfectColor precisely matches the color and finish, but an older or already cured part can still read differently when you place a fresh match next to it. Gloss, texture, cure, weathering, film build, substrate, and batch variation can all affect how SRFS 21892 RAL 5005 Signal Blue looks in use. If the color must blend beside an installed part, an approved sample or the actual part is the safest reference.

Is SRFS 21892 RAL 5005 Signal Blue a good match for touch-up after transportation damage, installation damage, fabrication damage, or missed spots?

Yes. A match of IFS Coatings SRFS 21892 RAL 5005 Signal Blue is commonly used as a touch-up match for chips, scratches, rub marks, drilled holes, cut edges, field modifications, and missed spots in the original finish. MyPerfectColor custom-matched paint is intended to help repair those problem areas while keeping the color and finish aligned with the coated part.

For small repairs, choose the format that fits the job and the size of the damaged area.

Can I use SRFS 21892 RAL 5005 Signal Blue on plastic snaps, screw heads, or other small parts that cannot be powder coated?

Yes. A match of IFS Coatings SRFS 21892 RAL 5005 Signal Blue is a practical reference when you need small ancillary parts to coordinate with a coated assembly. That includes plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and similar hardware that cannot go through the original coating process.

Clean prep and the right primer, if needed for the substrate, matter as much as the color match.

Is MyPerfectColor SRFS 21892 RAL 5005 Signal Blue the original powder coating material, or a liquid paint match?

It is a custom-matched MyPerfectColor paint that precisely matches the color and finish of SRFS 21892 RAL 5005 Signal Blue. It is not the original powder coating material or the original factory coating system.

That matters because a liquid touch-up can still look different beside a cured finish due to gloss, texture, film build, and how the original coating aged or cured. If the part will be compared side by side, use the actual part or an approved sample whenever possible.

What surface prep should I use before applying SRFS 21892 RAL 5005 Signal Blue to metal, plastic, or a previously coated part?

Start with a clean, dry, grease-free surface. Light scuffing is often helpful where the substrate and existing finish allow it, and some surfaces will need primer for proper adhesion. Metal, plastic, and previously coated parts do not all behave the same, so the prep step should match the substrate and the repair location.

If you are unsure about the surface, test a small area or follow the product directions before coating the full part.

How quickly will I receive my paint matched to IFS Coatings SRFS 21892 RAL 5005 Signal Blue?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings SRFS 21892 RAL 5005 Signal Blue depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings SRFS 21892 RAL 5005 Signal Blue coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings SRFS 21892 RAL 5005 Signal Blue coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings SRFS 21892 RAL 5005 Signal Blue? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings SRFS 21892 RAL 5005 Signal Blue, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings SRFS 21892 RAL 5005 Signal Blue coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings SRFS 21892 RAL 5005 Signal Blue will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings SRFS 21892 RAL 5005 Signal Blue color?

MyPerfectColor has the original IFS Coatings SRFS 21892 RAL 5005 Signal Blue sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings SRFS 21892 RAL 5005 Signal Blue by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings SRFS 21892 RAL 5005 Signal Blue?
The need for primer for IFS Coatings SRFS 21892 RAL 5005 Signal Blue depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.