Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ PLSF20064 /Ral 5005 Signal Blue *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings PLSF20064 /Ral 5005 Signal Blue is a deep, cool blue with strong saturation and a slight violet cast. Its low LRV means it reads as a dark finish rather than a bright accent, with a clean blue character that can shift darker as the film build and sheen increase.

For powder-coated finish touch-up, MyPerfectColor custom spray paint is useful after transportation damage, installation damage, fabrication work, service marks, or missed spots in the original finish. It also works well on ancillary parts that cannot go through the original coating process, such as screw heads, brackets, end caps, trim plugs, fastener covers, vent pieces, enclosure details, and sample panels that need to coordinate with a coated assembly.

Because this is a dark, saturated blue, coverage is usually manageable, but the substrate still matters. A light or uneven base can show through more easily if the film is thin, and gloss or texture differences can make repair boundaries more noticeable. MyPerfectColor precisely matches the color and finish, but a fresh liquid repair can still read differently beside an aged, cured powder-coated part because light, surface texture, and film build affect the appearance.

That difference is most important when you are repairing an installed part rather than finishing a separate replacement piece. For replacement hardware, fabricated add-ons, or other stand-alone parts, a close color-and-finish match is often the right target; for a weathered existing finish, comparing against the original coated part or an approved sample can help set expectations before ordering.

Similar colors:

PLSF 20064 / RAL 5005
SRFS 21892 RAL 5005 Signal Blue
PLSF20027 /Ral 5010 Gentian Blue

Frequently Asked Questions About Match of IFS Coatings™ PLSF20064 /Ral 5005 Signal Blue *

Will MyPerfectColor PLSF20064 /Ral 5005 Signal Blue match an older cured powder-coated part exactly?

MyPerfectColor precisely matches the color and finish of PLSF20064 /Ral 5005 Signal Blue, but an older cured part can still read differently after installation or service. Gloss, texture, age, weathering, cure, and batch variation can all affect how the existing finish looks beside a fresh repair.

If the area is highly visible, compare against the actual part or an approved sample panel before ordering touch-up paint.

Is PLSF20064 /Ral 5005 Signal Blue the right reference for touch-up after chips, scratches, or missed spots in the original finish?

Yes. A match of IFS Coatings PLSF20064 /Ral 5005 Signal Blue is a practical reference for touch-up paint after transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, rub marks, or missed spots in the original powder coating.

Order MyPerfectColor paint matched to this color and finish, then prep the damaged area carefully so the repair has the best chance to blend with the surrounding coated surface.

Can I use PLSF20064 /Ral 5005 Signal Blue for screw heads, plastic snaps, trim plugs, or other ancillary parts?

Yes. A match of IFS Coatings PLSF20064 /Ral 5005 Signal Blue is commonly used to coordinate ancillary items that cannot go through the same coating process as the main part, such as screw heads, rivet heads, clips, covers, trim plugs, end caps, and small brackets.

For those parts, the goal is close color coordination with the coated assembly. Make sure the substrate can be painted and that any required surface prep or adhesion steps are appropriate for the material.

Will a liquid MyPerfectColor match of PLSF20064 /Ral 5005 Signal Blue look identical to the cured powder-coated finish?

MyPerfectColor precisely matches the color and finish of PLSF20064 /Ral 5005 Signal Blue, but a fresh liquid touch-up can still look different next to a cured powder-coated part. The original finish may have its own gloss, texture, film build, and age-related changes that affect the final appearance.

Use the match for touch-up, repair, or coordination work, but do not expect a liquid product to hide every difference on an existing coated part.

Should I match PLSF20064 /Ral 5005 Signal Blue from the color code, or is an existing coated part a better reference?

The color code is a good starting point for standard ordering, but an existing coated part or approved sample panel is often the better reference when the finish is highly visible, the tolerance is tight, or the original coating has texture, gloss variation, or wear.

If you can send a sample or compare against the actual part, that usually reduces the risk of ordering the wrong appearance for PLSF20064 /Ral 5005 Signal Blue.

How quickly will I receive my paint matched to IFS Coatings PLSF20064 /Ral 5005 Signal Blue?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings PLSF20064 /Ral 5005 Signal Blue depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings PLSF20064 /Ral 5005 Signal Blue coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF20064 /Ral 5005 Signal Blue coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings PLSF20064 /Ral 5005 Signal Blue? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings PLSF20064 /Ral 5005 Signal Blue, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings PLSF20064 /Ral 5005 Signal Blue coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF20064 /Ral 5005 Signal Blue will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings PLSF20064 /Ral 5005 Signal Blue color?

MyPerfectColor has the original IFS Coatings PLSF20064 /Ral 5005 Signal Blue sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF20064 /Ral 5005 Signal Blue by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings PLSF20064 /Ral 5005 Signal Blue?
The need for primer for IFS Coatings PLSF20064 /Ral 5005 Signal Blue depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.