Match of Duranar™ UC50958 XL Silver Gray *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Duranar UC50958 XL Silver Gray is a muted medium gray with a subdued silver tone and a slight green-cool undertone. Its very low chroma keeps it restrained rather than crisp, while the mid-level lightness gives it enough presence to read clearly on metal parts without turning dark.

For touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish, MyPerfectColor precisely matches the color and finish. It can be used on coated metal parts, replacement brackets, vents, grilles, screw heads, washers, trim plugs, fastener covers, end caps, and small fabricated accessories that need to coordinate with an existing coated assembly. It also works well for sample panels, prototypes, and field-installed details where the color reference matters more than duplicating the original coating process.

Because this is a quiet, low-chroma gray, color shift is usually less dramatic than with brighter finishes, but gloss, texture, film build, and substrate can still change how the repair reads beside an aged cured finish. Small touch-up areas may show edges or sheen differences even when the color match is correct, and a darker or uneven base can influence coverage until the film builds. When the adjacent coated part has aged and the tolerance is tight, an approved sample or the part itself is safer for the closest visual check.

Product Data

See Technical Data Sheets
See Safety Data Sheets

Matching Duranar Paint Colors

MyPerfectColor is able match all of the Duranar Paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Duranar Paint color by matching the original Duranar Paint color books and swatches.

The colors shown on this website are computer video simulations of the Duranar Paint Color and may not match Duranar Paint Color standards. Refer to Duranar Paint Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Duranar Paint color. If you intend to touch up paint that has been on your walls or siding for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Duranar™ UC50958 XL Silver Gray *

Will MyPerfectColor Duranar UC50958 XL Silver Gray match an existing cured finish exactly?

MyPerfectColor can match Duranar UC50958 XL Silver Gray as a paint reference, but a cured part can still read differently once the touch-up is applied. Gloss, texture, age, weathering, cure state, film build, substrate, and batch variation can all change how the finish looks beside the original coating. If the repair is on a visible area, compare against an existing part or approved panel before ordering.

Is Duranar UC50958 XL Silver Gray a good choice for chips, scratches, and missed spots after fabrication or installation?

Yes. A match of Duranar UC50958 XL Silver Gray is commonly used for touch-up after transportation damage, installation damage, fabrication work, field drilling, cutting, welding, handling marks, or missed spots in the original finish. MyPerfectColor precisely matches the color and finish so you can repair the affected area without changing the rest of the coated part. For a small repair, make sure the surface is clean and fully prepared before applying the touch-up paint.

Can I use Duranar UC50958 XL Silver Gray on screw heads, clips, plugs, or other hardware that cannot be coated in the original process?

Yes. A match of Duranar UC50958 XL Silver Gray can be used to coordinate ancillary parts such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fasteners, and brackets when they cannot go through the same original coating process. Ordering a MyPerfectColor match helps those smaller parts blend with the surrounding coated assembly. Use the same finish reference for all related pieces so the visible hardware stays consistent.

If I order Duranar UC50958 XL Silver Gray in liquid paint, will it look exactly like the original cured Duranar finish?

Not always. MyPerfectColor precisely matches the color and finish, but a fresh liquid touch-up can still look different next to a cured Duranar finish because the original surface may have different gloss, texture, film build, cure, and aging. That is true whether the reference started as a liquid coating or a powder coating. If you need side-by-side comparison, test against the actual part before painting the full piece.

Should I use an existing part or sample panel for Duranar UC50958 XL Silver Gray instead of only the color code?

Use an existing coated part or approved sample panel when the finish is highly visible, the tolerance is tight, or the surface has texture or any special effect. The code Duranar UC50958 XL Silver Gray is a good reference, but an actual part is often safer when the current finish may have aged or changed. If you have both, compare them before ordering so you know whether the standard reference is enough.

How quickly will I receive my paint matched to Duranar UC50958 XL Silver Gray?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Duranar UC50958 XL Silver Gray depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Duranar UC50958 XL Silver Gray coating?

Yes, you can use the acrylic enamel paint as a touch up for the Duranar UC50958 XL Silver Gray coating. MyPerfectColor precisely matches the color and sheen of the official Duranar color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Duranar UC50958 XL Silver Gray? And how much area will one can of spray paint cover?

To make touch up paint for the Duranar UC50958 XL Silver Gray, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Duranar UC50958 XL Silver Gray coating?

MyPerfectColor acrylic enamel paint matching the Duranar UC50958 XL Silver Gray will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Duranar metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Duranar UC50958 XL Silver Gray color?

MyPerfectColor has the original Duranar UC50958 XL Silver Gray sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Duranar UC50958 XL Silver Gray by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Duranar UC50958 XL Silver Gray?

The need for primer for Duranar UC50958 XL Silver Gray depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.