Match of Duranar™ Pewter UC51713XL *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Duranar Pewter UC51713XL reads as a muted, medium-depth gray with a slight green cast and very low chroma. It has a restrained pewter character rather than a clean silver look, and the finish can read a little deeper or flatter depending on sheen and substrate.

For touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots in the original finish, MyPerfectColor precisely matches the color and finish. It can be used on coated metal panels, brackets, enclosures, railings, trim pieces, screw heads, trim plugs, end caps, and other ancillary parts that need to coordinate with the surrounding Duranar finish.

Because this is a low-chroma neutral, coverage is usually manageable, but surface prep, film build, and spray technique still matter. A small repair beside an existing cured finish may show some difference in gloss or texture even when the color match is correct, so matching the reference color is not the same as duplicating an aged factory coating.

It is also useful for replacement parts, sample panels, and fabricated details where close color-and-finish coordination matters more than reproducing every aspect of the original coating process. This makes it a practical choice for parts that need a quiet gray-pewter appearance without relying on the original liquid coating system.

Product Data

See Technical Data Sheets
See Safety Data Sheets

Matching Duranar Paint Colors

MyPerfectColor is able match all of the Duranar Paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Duranar Paint color by matching the original Duranar Paint color books and swatches.

The colors shown on this website are computer video simulations of the Duranar Paint Color and may not match Duranar Paint Color standards. Refer to Duranar Paint Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Duranar Paint color. If you intend to touch up paint that has been on your walls or siding for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Duranar™ Pewter UC51713XL *

Will MyPerfectColor match Duranar Pewter UC51713XL exactly on an older cured finish?

MyPerfectColor precisely matches the color and finish of Duranar Pewter UC51713XL, but an older or already cured part can still read differently from a fresh repair. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks side by side. If the part is already installed and highly visible, use the color reference as the starting point but expect some cured-finish match risk.

Is Duranar Pewter UC51713XL the right choice for touch-up after shipping, installation, or fabrication damage?

Yes, Duranar Pewter UC51713XL is the kind of reference you would order when you need touch-up paint for chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, or missed spots in the original finish. MyPerfectColor makes paint matched to the color and finish so you can repair the affected area instead of reworking the entire part. Choose the format that fits the repair, such as touch-up paint, spray paint, or paint pens.

Can Duranar Pewter UC51713XL be used for plastic snaps, screw heads, and other ancillary parts?

Yes, if the item can be painted, Duranar Pewter UC51713XL can be used as a match for ancillary parts such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fastener hardware, and small brackets. This is useful when the part needs to coordinate with a coated assembly but cannot go through the original coating process. Make sure the surface is suitable for the product format you order and that the part is prepared correctly for paint.

Why can Duranar Pewter UC51713XL look different in liquid touch-up paint than on the cured finish?

A match of Duranar Pewter UC51713XL is a liquid coating reference in this collection, and MyPerfectColor precisely matches the color and finish. Even so, a fresh liquid touch-up can still read differently beside a cured finish because gloss, texture, film build, cure, substrate, and age affect the appearance. That is normal when you are matching to an installed coated part, so use the color reference for coordination but do not expect every side-by-side comparison to be identical.

Should I use an existing part or sample panel instead of just the name Duranar Pewter UC51713XL?

Yes, if the finish is highly visible or the tolerance is tight, an existing coated part or approved sample panel is the safer reference than the name alone. Duranar Pewter UC51713XL gives you the target color reference, but a real part can also include gloss, texture, age, and production variation that the name does not show. If you have an approved panel, OEM reference, or matching existing part, use that to reduce ordering risk before you buy.

How quickly will I receive my paint matched to Duranar Pewter UC51713XL?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Duranar Pewter UC51713XL depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Duranar Pewter UC51713XL coating?

Yes, you can use the acrylic enamel paint as a touch up for the Duranar Pewter UC51713XL coating. MyPerfectColor precisely matches the color and sheen of the official Duranar color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Duranar Pewter UC51713XL? And how much area will one can of spray paint cover?

To make touch up paint for the Duranar Pewter UC51713XL, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Duranar Pewter UC51713XL coating?

MyPerfectColor acrylic enamel paint matching the Duranar Pewter UC51713XL will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Duranar metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Duranar Pewter UC51713XL color?

MyPerfectColor has the original Duranar Pewter UC51713XL sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Duranar Pewter UC51713XL by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Duranar Pewter UC51713XL?

The need for primer for Duranar Pewter UC51713XL depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.