Looking for color by Hex, RGB, CMYK, or Lab?

Match of Duranar™ UC40577 Black *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

A match of Duranar UC40577 Black is a very dark near-black with a soft charcoal cast and low chroma. It reads close to neutral, with only a faint cool bias, and the low LRV keeps it visually deep rather than gray.

For Duranar UC40577 Black, MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots in the original finish. It is a practical match for coated metal frames, brackets, housings, enclosures, railings, trim pieces, vent covers, screw heads, fastener covers, end caps, and other ancillary items that need to blend with the surrounding assembly.

Because this is such a dark color, surface prep and sheen control matter. Small repairs can still show edges, film-build differences, or a slight shift in gloss next to an older cured finish, even when the color reference is correct. Dark finishes also tend to reveal scratches, dust, and substrate defects more clearly than lighter colors, so a smooth base and even application help the result read consistently.

MyPerfectColor custom spray paint is useful when you need a coated-finish color match for a replacement part, a fabricated accessory, a sample panel, or a field-installed detail that cannot go through the original liquid coating process. When you are matching an existing part, remember that age, weathering, cure, texture, and gloss can make a cured finish read differently from a fresh touch-up coat.

Similar colors:

UC99630 XL Black Metallic
UC85511 Duracron S600 Black
UC134955 Focus Black II

Product Data

Matching Duranar Paint Colors

MyPerfectColor is able match all of the Duranar Paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Duranar Paint color by matching the original Duranar Paint color books and swatches.

The colors shown on this website are computer video simulations of the Duranar Paint Color and may not match Duranar Paint Color standards. Refer to Duranar Paint Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Duranar Paint color. If you intend to touch up paint that has been on your walls or siding for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Duranar™ UC40577 Black *

Will MyPerfectColor Duranar UC40577 Black match an older cured finish on an existing part exactly?

MyPerfectColor precisely matches the color and finish for Duranar UC40577 Black, but an older cured part can still read differently from a fresh repair. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks once it is installed.

If the area is highly visible or the tolerance is tight, an existing part or approved sample is usually a safer reference than the color code alone.

Is MyPerfectColor UC40577 Black suitable for touch-up after transport, installation, fabrication damage, or missed spots?

Yes. A match of Duranar UC40577 Black is commonly used as a touch-up reference for chips, scratches, rub marks, drilled holes, cut edges, field modifications, transport damage, installation damage, fabrication damage, and missed spots in the original finish.

Available in MyPerfectColor touch-up paint and other formats for coated-finish repair work, it is meant to help you restore the color and finish on the affected area without having to refinish the whole part.

Can Duranar UC40577 Black be used for screw heads, trim plugs, clips, or other ancillary hardware?

Yes. A match of Duranar UC40577 Black is a practical match for ancillary items such as screw heads, rivet heads, trim plugs, clips, covers, end caps, and similar small parts that cannot go through the original coating process but still need to coordinate with the finished assembly.

For these items, the goal is close visual coordination with the surrounding finish, not treating the paint as the original coating material.

If I order Duranar UC40577 Black in liquid paint, will it look exactly like the original cured finish?

Not always. MyPerfectColor precisely matches the color and finish for Duranar UC40577 Black, but a fresh liquid touch-up can still read differently beside a cured coated part because gloss, texture, film build, substrate, and cure all affect appearance.

This matters most when you are touching up next to an installed part or comparing the repair side by side with the original finish.

Should I use an existing part or approved sample for Duranar UC40577 Black instead of the color code alone?

Use an existing part or approved sample panel when the finish is highly visible, the tolerance is tight, or the original coating has texture or special finish behavior. In those cases, Duranar UC40577 Black from the code alone may not tell you enough about the exact installed appearance.

The color code is a good starting point for ordering, but a sample or existing part is the safer reference when you need the closest possible visual match to what is already in service.

How quickly will I receive my paint matched to Duranar UC40577 Black?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Duranar UC40577 Black depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Duranar UC40577 Black coating?

Yes, you can use the acrylic enamel paint as a touch up for the Duranar UC40577 Black coating. MyPerfectColor precisely matches the color and sheen of the official Duranar color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Duranar UC40577 Black? And how much area will one can of spray paint cover?

To make touch up paint for the Duranar UC40577 Black, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Duranar UC40577 Black coating?

MyPerfectColor acrylic enamel paint matching the Duranar UC40577 Black will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Duranar metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Duranar UC40577 Black color?

MyPerfectColor has the original Duranar UC40577 Black sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Duranar UC40577 Black by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Duranar UC40577 Black?
The need for primer for Duranar UC40577 Black depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.