Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ PLSF 40492 /Ral 7013 Brown Grey *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings PLSF 40492 /Ral 7013 Brown Grey is a dark, muted brown-gray with a low-chroma, earthy cast. It reads as a subdued deep neutral rather than a clean gray, with a warm undertone and low light reflectance.

Use MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, or missed spots on powder-coated parts. It also suits ancillary items such as screw heads, trim plugs, end caps, clip-on covers, brackets, rails, and fabricated accessories that need to coordinate with the coated assembly.

Because this color is dark and fairly muted, small repair areas can still show surface prep marks, edge lines, or sheen shifts if the substrate or finish build changes. On darker substrates, coverage may look stronger sooner, while uneven underlayers or rough edges can still influence the final read.

For replacement parts, sample panels, and field-installed components, the match helps maintain close color coordination without implying the same cure, texture, or film build as an existing cured powder-coated finish. If the part being repaired is aged or weathered, the original surface may not read exactly like the fresh match.

Similar colors:

PLSF 404592 / RAL 7013
SRSL 95575 2604 Dark Bronze Bonded
SRSL 45893 2604 Antique

Frequently Asked Questions About Match of IFS Coatings™ PLSF 40492 /Ral 7013 Brown Grey *

For IFS Coatings PLSF 40492 /Ral 7013 Brown Grey, will a match look exact on an older cured part?

MyPerfectColor precisely matches the color and finish for IFS Coatings PLSF 40492 /Ral 7013 Brown Grey, but an older cured part can still read differently once it is installed. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks beside a fresh repair. If the part is already in service and the visual tolerance is tight, it is safer to compare against the actual part or an approved sample rather than relying on the color name alone.

Is IFS Coatings PLSF 40492 /Ral 7013 Brown Grey a good choice for touch-up after shipping or installation damage?

Yes. A match of IFS Coatings PLSF 40492 /Ral 7013 Brown Grey is commonly used as a touch-up reference for chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish. Order MyPerfectColor touch-up paint matched to this color and finish when you need to repair a specific area, not replace the entire coating system.

Can I use IFS Coatings PLSF 40492 /Ral 7013 Brown Grey on screw heads, clips, trim plugs, or other small hardware?

Yes. A match of IFS Coatings PLSF 40492 /Ral 7013 Brown Grey is often ordered for ancillary items such as screw heads, clips, trim plugs, end caps, fastener covers, brackets, and other small parts that cannot go through the original coating process but still need to coordinate with a coated assembly. In those cases, use MyPerfectColor paint matched to the color and finish so the separate item blends as closely as possible with the surrounding finish.

Does MyPerfectColor match IFS Coatings PLSF 40492 /Ral 7013 Brown Grey exactly, or can the liquid repair still look different from the cured finish?

MyPerfectColor is a match of IFS Coatings PLSF 40492 /Ral 7013 Brown Grey, and it precisely matches the color and finish reference. Even so, a liquid repair can still look different from the original cured finish because the installed coating may have its own gloss, texture, film build, cure history, and age. If you are matching beside an existing part, plan for those differences and verify against the actual surface when the match has to be tight.

How do gloss and texture affect IFS Coatings PLSF 40492 /Ral 7013 Brown Grey when I order touch-up paint?

Gloss and texture can change how IFS Coatings PLSF 40492 /Ral 7013 Brown Grey reads after application, even when the color match is correct. A smooth or satin liquid finish may not look the same as a textured, matte, gloss, or effect-coated surface once it is beside the original part. If appearance needs to track closely, choose the format that fits the repair and compare the repair area against the actual coated surface, not just the color name.

How quickly will I receive my paint matched to IFS Coatings PLSF 40492 /Ral 7013 Brown Grey?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings PLSF 40492 /Ral 7013 Brown Grey depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings PLSF 40492 /Ral 7013 Brown Grey coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey color?

MyPerfectColor has the original IFS Coatings PLSF 40492 /Ral 7013 Brown Grey sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF 40492 /Ral 7013 Brown Grey by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings PLSF 40492 /Ral 7013 Brown Grey?
The need for primer for IFS Coatings PLSF 40492 /Ral 7013 Brown Grey depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.