Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ SRSL 95575 2604 Dark Bronze Bonded *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings SRSL 95575 2604 Dark Bronze Bonded reads as a very dark bronze-brown with low chroma, a muted earthy cast, and a slight warm bias. At an LRV of 7.33, it sits close to black in value while still showing brown and bronze character rather than a neutral charcoal.

MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original powder-coated finish. It can be used on frames, brackets, enclosures, railings, housings, trim pieces, and fabricated panels, and it also works for smaller ancillary items such as screw heads, clips, trim plugs, end caps, and fastener covers that need to coordinate with the coated assembly.

Because this is a dark, restrained color, it usually hides better than a light shade, but it can make scratches, edge build, sheen shifts, and surface texture more noticeable on repaired areas. Coverage can also read differently over a light or uneven substrate, and a fresh liquid touch-up may not look identical to an older cured part if gloss, film build, or weathering have changed the installed finish.

Similar colors:

PLSF 40492 /Ral 7013 Brown Grey
PLSF 404592 / RAL 7013
SRSL 45893 2604 Antique

Frequently Asked Questions About Match of IFS Coatings™ SRSL 95575 2604 Dark Bronze Bonded *

Will a match of SRSL 95575 2604 Dark Bronze Bonded look exactly like an older cured finish on my part?

Not always. MyPerfectColor precisely matches the color and finish of SRSL 95575 2604 Dark Bronze Bonded, but an older cured part can still read differently because of gloss, texture, cure, age, weathering, substrate, and batch variation.

If you are matching beside an existing finish and the tolerance is tight, it is safer to compare against the actual part or an approved sample instead of relying on the color name alone.

Can SRSL 95575 2604 Dark Bronze Bonded be used for touch-up after chips, scratches, or missed spots?

Yes. A match of SRSL 95575 2604 Dark Bronze Bonded is commonly used for touch-up after transportation damage, installation damage, fabrication damage, field modification damage, drilled holes, cut edges, rub marks, or missed spots in the original finish.

Use the matched MyPerfectColor paint on the damaged area, but if you are repairing a small spot next to an older cured finish, check the result against the surrounding part because the existing finish may not read exactly like the fresh repair.

Can I use SRSL 95575 2604 Dark Bronze Bonded on screw heads, trim plugs, or other small hardware that cannot be coated the same way?

Yes. A match of IFS Coatings SRSL 95575 2604 Dark Bronze Bonded is often ordered as MyPerfectColor paint for ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fastener hardware, and brackets that need to coordinate with a coated assembly.

This is a practical way to match small parts that cannot go through the original coating process but still need close color coordination with the surrounding finish.

If SRSL 95575 2604 Dark Bronze Bonded is a coating reference, will a liquid touch-up match the cured factory finish exactly?

MyPerfectColor precisely matches the color and finish of SRSL 95575 2604 Dark Bronze Bonded, but a fresh liquid touch-up can still look different beside a cured factory finish.

The main reasons are gloss, texture, film build, cure, substrate, and age. If the original reference started as a powder coating or a liquid coating, the color reference is still the target, but the installed finish on the part may not read identically under the same light.

How should I reorder SRSL 95575 2604 Dark Bronze Bonded if I need consistent results across multiple parts?

For the best consistency, reorder by the exact brand color name and code, SRSL 95575 2604 Dark Bronze Bonded, and keep the same product format and application method for related parts.

Even with the correct match, final appearance can shift with substrate, prep, part age, and whether you are matching a fresh sample or an older cured finish. If the work is visible or tightly controlled, test on one part or sample before finishing the full run.

How quickly will I receive my paint matched to IFS Coatings SRSL 95575 2604 Dark Bronze Bonded?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings SRSL 95575 2604 Dark Bronze Bonded depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings SRSL 95575 2604 Dark Bronze Bonded coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded color?

MyPerfectColor has the original IFS Coatings SRSL 95575 2604 Dark Bronze Bonded sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings SRSL 95575 2604 Dark Bronze Bonded by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings SRSL 95575 2604 Dark Bronze Bonded?
The need for primer for IFS Coatings SRSL 95575 2604 Dark Bronze Bonded depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.