Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ SLFL 41939 Bronze Texture *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings SLFL 41939 Bronze Texture reads as a deep bronze-brown with a muted, low-chroma character and only a slight warm cast. It is closer to a dark neutral than a vivid bronze, so the color comes across as restrained and grounded rather than bright or reflective.

MyPerfectColor custom spray paint in this match is useful for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish. It can also be used on coated hardware and ancillary parts such as bracket covers, screw heads, trim plugs, end caps, vents, grilles, and small fabricated accessories where close color and finish coordination matters. MyPerfectColor precisely matches the color and finish.

Because the color is dark and low-chroma, coverage and surface prep still matter. Thin application over a lighter substrate can show contrast more easily, and differences in gloss or texture may stand out beside a cured powder-coated part. On small repairs, steady film build helps the touch-up read more consistently.

Keep in mind that a matched liquid coating can still read differently from an older installed finish because cure, age, substrate, and light reflection all affect appearance. If you are repairing next to an existing coated part, the color reference is the starting point, but the condition of the cured surface still matters.

Similar colors:

PLSF 70217 / RAL 7022 Umbra Grey
PLSF 70217 /Ral 7022 Umbra Grey
FRSL49337 2605 PPCDBZ5 Dark Bronze

Frequently Asked Questions About Match of IFS Coatings™ SLFL 41939 Bronze Texture *

For IFS Coatings SLFL 41939 Bronze Texture, will MyPerfectColor match an existing cured finish exactly?

MyPerfectColor precisely matches the color and finish for IFS Coatings SLFL 41939 Bronze Texture, but an older cured part can still read differently beside fresh touch-up. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the same reference appears in use.

If you need a side-by-side match on an existing part, the safest approach is to compare against the actual coated part or an approved sample rather than the color name alone.

Is IFS Coatings SLFL 41939 Bronze Texture a good choice for touch-up after transportation, installation, or fabrication damage?

Yes. This color reference is commonly used when you need to repair chips, scratches, rub marks, handling damage, drilled holes, cut edges, field modifications, or missed spots in the original finish.

MyPerfectColor can provide a match of IFS Coatings SLFL 41939 Bronze Texture for localized touch-up after transportation damage, installation damage, fabrication damage, or missed coverage. It is best used to repair the affected area or a replacement part, not to hide major finish differences on an aged surrounding panel.

Can I use IFS Coatings SLFL 41939 Bronze Texture on plastic snaps, screw heads, or other hardware that was not powder coated?

Yes, when the goal is to coordinate small ancillary parts with an existing coated assembly. A match of IFS Coatings SLFL 41939 Bronze Texture can be matched on items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and similar hardware that cannot go through the original coating process.

Surface prep and primer depend on the material, so clean and prep each part for its substrate before painting.

How is a liquid paint match of IFS Coatings SLFL 41939 Bronze Texture different from the original cured powder-coated finish?

A liquid match of IFS Coatings SLFL 41939 Bronze Texture is matched to the color and finish reference, not to the exact cure behavior of the original coated part. Even when MyPerfectColor precisely matches the color and finish, a fresh liquid repair can still look different next to a cured powder-coated surface because gloss, texture, film build, and light reflection are not the same.

If the part will be compared side by side, use the actual coated part or an approved sample to confirm the match before ordering.

What surface prep should I use before applying IFS Coatings SLFL 41939 Bronze Texture to metal, plastic, or a previously coated part?

Start with a clean, grease-free surface and remove dust, loose coating, and other contamination before painting. For metal, a light scuff and the right primer can help when the surface is bare or damaged. For plastic, use a substrate-appropriate primer if adhesion is needed.

For a previously coated part, make sure the old finish is sound, then clean and lightly scuff where appropriate so the new coating can bond. Different substrates behave differently, so test a small area if the part is high visibility or the existing finish is fragile.

How quickly will I receive my paint matched to IFS Coatings SLFL 41939 Bronze Texture?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings SLFL 41939 Bronze Texture depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings SLFL 41939 Bronze Texture coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings SLFL 41939 Bronze Texture coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings SLFL 41939 Bronze Texture? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings SLFL 41939 Bronze Texture, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings SLFL 41939 Bronze Texture coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings SLFL 41939 Bronze Texture will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings SLFL 41939 Bronze Texture color?

MyPerfectColor has the original IFS Coatings SLFL 41939 Bronze Texture sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings SLFL 41939 Bronze Texture by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings SLFL 41939 Bronze Texture?
The need for primer for IFS Coatings SLFL 41939 Bronze Texture depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.