Match of IFS Coatings™ PLSF 70217 / RAL 7022 Umbra Grey *

MyPerfectColor precisely matches the color and finish for IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey, but an older or already cured part can still read differently beside fresh touch-up paint. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish appears.

If the repair will sit next to a visible existing part, use the existing part or an approved sample as the comparison point whenever possible.

Yes. A match of IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey is commonly used as touch-up paint for chips, scratches, rub marks, drilled holes, cut edges, field modifications, missed spots, and damage from transportation or installation.

MyPerfectColor precisely matches the color and finish, which makes it suitable for repairing the damaged area or covering a missed section of the original finish. For a small repair, apply it only to the affected area and follow normal surface prep for the substrate.

Yes. This color is often used to coordinate ancillary parts such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and other small hardware that cannot go through the original coating process.

MyPerfectColor makes a paint match of IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey so those separate parts can blend with the coated assembly. Make sure the part material and prep method are suitable for paint before ordering.

Not always. A liquid paint matched to IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey can still look different from the original cured finish because the installed part may have different gloss, texture, film build, cure, or age.

MyPerfectColor precisely matches the color and finish, but the original surface condition still matters. If the goal is close coordination on a replacement part, sample panel, or accessory, the match is usually easier than trying to blend into an older cured surface.

These finish variables can change how PLSF 70217 / RAL 7022 Umbra Grey reads after application, even when the color is correct. A smooth finish, a textured surface, and a different film build will all reflect light differently.

Use the finish you are matching as the reference, not just the color name. If the existing coated part has a special surface feel or appearance, that is part of the match decision and not just the color itself.

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF 70217 / RAL 7022 Umbra Grey by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.