70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Cerakote FS Field Drab H-30118 is a muted, medium-dark brown with an olive-yellow cast. It reads low-chroma and subdued rather than clean or bright, with a deeper appearance that sits close to the lower end of the lightness range.
As a match of Cerakote FS Field Drab H-30118, MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service scuffs, or missed spots in the original finish. It can also be used on screw heads, brackets, trim plugs, end caps, vent covers, housings, rails, and fabricated accessory parts that need to blend with a coated assembly without going through the original coating process.
Because this is a darker, muted color, coverage can be more sensitive to the substrate underneath, especially on light, uneven, or repaired surfaces. Film build, sheen, and surface texture can change how the drab brown-olive tone reads, and small touch-up areas may still show a repair boundary beside an aged coated finish.
If you are matching an existing part, the cured finish may have shifted in gloss or texture over time, so a reference color and a weathered surface may not read exactly the same. MyPerfectColor precisely matches the color and finish, but the final appearance still depends on lighting, substrate, and application.
Similar colors:
Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.
MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.
The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor precisely matches the color and finish for Cerakote FS Field Drab H-30118, but an older cured part may still not read exactly like a fresh repair. Gloss, texture, age, weathering, cure history, substrate, and batch variation can all change how the finish appears. If the new paint must blend beside an existing part, compare against the actual part or an approved sample whenever possible.
Yes. A match of Cerakote FS Field Drab H-30118 is a practical reference when you need touch-up paint for chips, scratches, rub marks, transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish. Order MyPerfectColor paint matched to that reference when the goal is to repair the visible area while keeping the rest of the part in place.
Yes. A match of Cerakote FS Field Drab H-30118 can be used as the color reference for ancillary parts such as screw heads, plastic snaps, rivet heads, trim plugs, end caps, clips, covers, brackets, and small hardware that cannot go through the same original finish process. MyPerfectColor makes a match of that reference so the added part coordinates with the surrounding finish.
Not always. MyPerfectColor precisely matches the color and finish, but a liquid touch-up can still look different next to the original cured part because gloss, texture, film build, and age affect how the finish reads. That matters even when Cerakote FS Field Drab H-30118 is the correct color reference. If the part will be viewed side by side with the original finish, test against the actual part or an approved sample before committing to a full repair.
Start with cleaning and degreasing so the surface is free of oil, dust, and release residue. Light scuffing can help on sound existing coatings when the surface and product system allow it, while bare metal and plastic may need different prep and primer choices. The right primer depends on the substrate and on what is already on the part, so do not assume the same prep works for metal, plastic, and previously coated surfaces.
Yes, you can use the acrylic enamel paint as a touch up for the Cerakote FS Field Drab H-30118 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
To make touch up paint for the Cerakote FS Field Drab H-30118, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
MyPerfectColor acrylic enamel paint matching the Cerakote FS Field Drab H-30118 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
MyPerfectColor has the original Cerakote FS Field Drab H-30118 sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Cerakote FS Field Drab H-30118 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.