Match of Cerakote™ Barrett Brown H-269 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Barrett Brown H-269 is a dark, muted brown with a warm yellow-red undertone and fairly low chroma. It reads earthy rather than clean or bright, with enough depth to sit close to a deep tan-brown without turning near-black.

For coated-part touch-up, MyPerfectColor precisely matches the color and finish so you can address transportation damage, installation marks, fabrication work, service scratches, and missed spots in the original finish. It is a practical match for spray-painted or refinished metal parts such as brackets, housings, railings, shrouds, trim pieces, switch covers, screw heads, fastener caps, end caps, and fabricated accessories that need to coordinate with surrounding coated components. It also works well for sample panels, replacement pieces, and ancillary items that cannot go through the original coating process but still need close color and finish coordination.

Because this is a darker, muted brown, surface prep and film build can affect the final look, and small repair areas may show sheen or texture differences next to an aged coated finish even when the color reference is correct. Darker browns can also make scratches, edges, and substrate variation easier to notice if coverage is thin, so even spray application and proper build matter. Since this color reference represents a liquid coating match rather than the original factory-applied finish itself, a repaired part may not read exactly the same as a weathered or heavily textured existing surface.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Barrett Brown H-269 *

Will a match of Cerakote Barrett Brown H-269 look exact beside my existing cured finish?

MyPerfectColor can match Cerakote Barrett Brown H-269 by color and finish, but an older cured part may still read a little different next to fresh touch-up paint. Gloss, texture, age, weathering, cure history, substrate, and batch variation can all change how the finish looks in place.

If the new paint must blend into a visible existing part, compare against the actual part or an approved sample when possible. If you are painting a separate replacement or ancillary part, the standard reference is usually the right starting point.

Can Cerakote Barrett Brown H-269 be used for chips, scratches, or missed spots?

Yes. A match of Cerakote Barrett Brown H-269 is commonly used for touch-up after transportation damage, installation damage, fabrication work, field modifications, drilled holes, cut edges, rub marks, or missed spots in the original finish.

MyPerfectColor precisely matches the color and finish, which helps when you need the repair area to coordinate with the surrounding coated part. Choose a format based on the size of the repair: touch-up paint for small areas, spray paint for larger coverage, or a paint pen or brush-in-cap bottle for very small marks.

Can I use Cerakote Barrett Brown H-269 on screw heads, clips, or plastic snaps that were not finished in the original process?

Yes. A match of Cerakote Barrett Brown H-269 is often used for ancillary parts such as screw heads, rivet heads, clips, covers, trim plugs, end caps, brackets, and other small items that need to coordinate with a coated assembly but cannot go through the same original finish process.

If the item is paintable, clean it well and choose a format that fits the part size and material. For small hardware, a paint pen or brush-in-cap bottle may be easier than spray paint. If the part is plastic or mixed material, confirm that it can be painted before ordering.

Will a liquid match of Cerakote Barrett Brown H-269 look the same as the original cured finish?

Not always. MyPerfectColor precisely matches the color and finish, but a fresh liquid touch-up can still look different beside the original cured finish because of gloss, texture, film build, substrate, cure, and age.

If you need a side-by-side match on an existing part, an approved sample panel or the actual part is safer than relying on the color name alone. That is especially important when the finish has aged or when close visual tolerance matters.

Who typically orders Cerakote Barrett Brown H-269 and what is it used for?

Manufacturers, fabricators, metal shops, job shops, OEMs, installers, maintenance teams, and coating shops use Cerakote Barrett Brown H-269 for touch-up paint, sample panels, prototypes, fabricated add-ons, and replacement parts that need to coordinate with an existing finish.

Available in MyPerfectColor touch-up paint, custom spray paint, paint pens, and other formats for coated-finish touch-up and ancillary-part matching. If the job has a tight visual tolerance, verify against an approved sample or the existing part before ordering.

How quickly will I receive my paint matched to Cerakote Barrett Brown H-269?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Barrett Brown H-269 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Barrett Brown H-269 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Barrett Brown H-269 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Barrett Brown H-269? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Barrett Brown H-269, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Barrett Brown H-269 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Barrett Brown H-269 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Barrett Brown H-269 color?

MyPerfectColor has the original Cerakote Barrett Brown H-269 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Barrett Brown H-269 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Barrett Brown H-269?

The need for primer for Cerakote Barrett Brown H-269 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.