70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Cerakote Ral 8000 H-8000 is a muted olive-brown khaki with a warm, earthy undertone. It reads as a medium-dark earth tone rather than a clean green or a red brown, and the lower LRV gives it a grounded, subdued appearance.
MyPerfectColor precisely matches the color and finish in custom spray paint for touch-up after transportation damage, installation damage, fabrication work, field drilling, or missed spots in the original finish. It can also be used on brackets, housings, end caps, screw heads, trim plugs, clips, and other ancillary parts that need to coordinate with a Cerakote-coated assembly.
Because this is a relatively dark, muted finish, substrate color, film build, and sheen can change how warm or olive it appears once sprayed. On small repair areas, surface texture and boundary lines may be more noticeable than the color shift itself.
When the job is going beside an existing cured part, the color reference is only part of the match. A fresh liquid touch-up can still read differently from an aged coated finish because gloss, wear, and surface texture affect how the color is seen.
Similar colors:
Ranger FX-106
Noveske Tiger Eye Brown H-187
Multicam Olive H-344
Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.
MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.
The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor precisely matches the color and finish, but a fresh touch-up beside an older cured part can still read differently because gloss, texture, cure, film build, substrate, age, and batch variation all affect appearance.
If the repair must blend tightly with an existing finished part, an approved sample or the actual part is the safer reference.
Yes. A match of Cerakote Ral 8000 H-8000 is commonly used for touch-up after transportation damage, installation damage, fabrication damage, handling marks, rubbed edges, drilled holes, cut edges, field modifications, or missed spots in the original finish.
MyPerfectColor makes a match of Cerakote Ral 8000 H-8000 so you can repair the damaged area with a coordinated color and finish.
Yes. A match of Cerakote Ral 8000 H-8000 can be used on ancillary items such as screw heads, rivet heads, clips, covers, trim plugs, end caps, fastener hardware, and similar small parts that need to coordinate with a coated assembly.
MyPerfectColor custom-matched paint is a practical option when the item cannot go through the original coating process but still needs close color coordination.
Not always. Even when MyPerfectColor precisely matches the color and finish, a fresh liquid touch-up can still look different next to the cured original finish because the original part may have different gloss, texture, cure, surface prep, film build, or age.
Use the reference color when ordering, but if the repair will sit next to an existing part, evaluate the actual part or a sample panel when the visual tolerance is tight.
Reorder by the exact brand color name, Cerakote Ral 8000 H-8000, and use the same product format for the same job whenever possible.
MyPerfectColor custom-matched paint is made to precisely match the color and finish, but final appearance can still shift with substrate, prep, surrounding part age, and the fact that a fresh touch-up is being compared with an existing cured finish.
For repeat work, keep a sample or approved part from the original job if the match is critical.
Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Ral 8000 H-8000 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
To make touch up paint for the Cerakote Ral 8000 H-8000, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
MyPerfectColor acrylic enamel paint matching the Cerakote Ral 8000 H-8000 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
MyPerfectColor has the original Cerakote Ral 8000 H-8000 sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Cerakote Ral 8000 H-8000 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.