70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Cerakote Multicam Olive H-344 reads as a muted olive with a brown-gray cast and modest depth. It is not a bright green; the low chroma gives it a subdued, earthy look that tends to sit closer to military or utility green than to a clean, saturated olive.
This color works well for touch-up after transportation damage, installation damage, fabrication work, field drilling, or missed spots on coated parts. MyPerfectColor precisely matches the color and finish, so it can be used on enclosures, brackets, railings, vents, switch covers, trim plugs, screw heads, end caps, and other ancillary items that need to coordinate with a Cerakote liquid-coated assembly.
Because the color is moderately dark, small differences in gloss, texture, substrate color, and film build can change how it reads once applied. On a cured existing finish, repair boundaries, edge build, and sheen shifts may remain visible even when the color reference is correct, especially if the part has aged or weathered.
For sample panels, prototype parts, replacement hardware, and fabrication details, this reference gives a practical starting point when close color-and-finish coordination matters more than duplicating every aspect of the original coating process. It is a match to the reference color and finish, not a guarantee that every repaired area on an older installed part will read identically under all lighting conditions.
Similar colors:
Noveske Tiger Eye Brown H-187
Coyote Tan H-235
Multicam Light Green H-340
Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.
MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.
The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor precisely matches the color and finish for Cerakote Multicam Olive H-344, but an older cured part can still read differently from a fresh match. Gloss, texture, age, weathering, cure, film build, substrate, and batch variation can all change how the finish looks in place.
If you need the closest visual match to an installed part, compare against the actual part or an approved sample, not just the color name.
Yes. A match of Cerakote Multicam Olive H-344 is commonly ordered as MyPerfectColor touch-up paint for chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish.
Choose the format that fits the repair area and the substrate, then use the coating reference to order the match.
Yes. A match of Cerakote Multicam Olive H-344 is often used to coordinate ancillary parts such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fasteners, and small brackets that cannot go through the original coating process.
For these items, order the MyPerfectColor match in the format that suits the part and its substrate, and verify prep and adhesion requirements for the material before coating.
Not always. Even when the color reference is correct, a liquid touch-up product can still look different next to the original cured finish because the part may have its own gloss, texture, film build, cure, and age-related changes.
MyPerfectColor precisely matches the color and finish, but it does not remove the visual differences created by the installed coating system or by weathering over time.
Reorder by the exact Cerakote color name and code, Cerakote Multicam Olive H-344, and keep the same product format for each related part whenever possible. That gives you the best chance of consistent results across repeat work.
Final appearance can still shift with substrate, prep, film build, and the age of the surrounding coated parts, so compare new work against the same reference standard each time.
Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Multicam Olive H-344 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
To make touch up paint for the Cerakote Multicam Olive H-344, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
MyPerfectColor acrylic enamel paint matching the Cerakote Multicam Olive H-344 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
MyPerfectColor has the original Cerakote Multicam Olive H-344 sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Cerakote Multicam Olive H-344 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.