Looking for color by Hex, RGB, CMYK, or Lab?

Match of Cerakote™ Polar Blue H-326 *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

A match of Cerakote Polar Blue H-326 reads as a cool blue with a clear gray cast, so it looks more subdued than bright or saturated. The low chroma keeps the color controlled, and the overall depth reads medium-dark rather than pale or airy.

For manufacturers, fabricators, and maintenance teams, MyPerfectColor precisely matches the color and finish in custom spray paint for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish. It can also be used on screw heads, clips, trim plugs, end caps, brackets, vents, enclosures, sample panels, and other small parts that need to coordinate with a coated assembly.

Because this is a muted blue-gray, small repair areas can still show edges, sheen shifts, or texture changes beside an aged cured finish. Film build, gloss level, substrate, and surface prep can all affect how the color reads, so a fresh liquid touch-up may not disappear into every existing part.

For replacement hardware, fabricated add-ons, and ancillary items that cannot go through the original coating process, matching the reference color is often the practical goal. When you are repairing beside an existing coated part, the condition of that finish can matter as much as the color itself.

Similar colors:

Cosmic FX-102
Crushed Orchid H-314
Sea Blue H-172

Product Data

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Polar Blue H-326 *

Will MyPerfectColor for Cerakote Polar Blue H-326 match an existing cured part exactly, or can the old finish still look different?

MyPerfectColor precisely matches the color and finish for Cerakote Polar Blue H-326, but an older cured part can still read differently once it is installed on the job. Gloss, texture, age, weathering, cure, substrate, film build, and batch variation can all change how the finish looks beside a fresh repair.

If you need the closest visual result on a visible existing part, use the Cerakote Polar Blue H-326 reference as the starting point, but consider an existing part or approved sample panel if the tolerance is tight.

Can I use Cerakote Polar Blue H-326 for touch-up after transportation damage, installation damage, fabrication damage, or missed spots?

Yes. A match of Cerakote Polar Blue H-326 is commonly used as MyPerfectColor touch-up paint for chips, scratches, rub marks, drilled holes, cut edges, handling damage, transport damage, installation damage, fabrication work, field modifications, and missed spots in the original coating process.

It is the right choice when you need MyPerfectColor to precisely match the color and finish for repair work on a coated part, rather than repainting the entire original coating system.

Can Cerakote Polar Blue H-326 be used on screw heads, plastic snaps, trim plugs, or other hardware that cannot go through the original coating process?

Yes. A match of Cerakote Polar Blue H-326 is often ordered for ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, clips, end caps, covers, brackets, and other small parts that need to coordinate with a coated assembly.

These parts usually cannot be finished in the same original process, so MyPerfectColor paint matched to Cerakote Polar Blue H-326 is a practical way to keep the visible hardware aligned with the surrounding finish.

If Cerakote Polar Blue H-326 is matched in liquid touch-up paint, will it still look different from the original cured finish?

Yes, it can. Even when the color reference is correct, a fresh liquid touch-up may not read exactly like the original cured finish because the installed part can have different gloss, texture, cure, film build, and light interaction.

For Cerakote Polar Blue H-326, MyPerfectColor precisely matches the color and finish, but that does not eliminate the visual differences that can come from matching a fresh repair against an aged or cured coating.

Should I use an existing part or sample panel instead of the Cerakote Polar Blue H-326 code when the match has to be very close?

Yes, if the finish is highly visible or the tolerance is tight, an existing coated part or approved sample panel is usually the safer reference for Cerakote Polar Blue H-326.

The color code is a good starting point, but the actual installed finish may have texture, gloss, wear, or other differences that are easier to judge from a real part or approved sample. That is especially useful when you need the best possible match for side-by-side comparison.

How quickly will I receive my paint matched to Cerakote Polar Blue H-326?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Polar Blue H-326 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Cerakote Polar Blue H-326 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Polar Blue H-326 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Polar Blue H-326? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Polar Blue H-326, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Polar Blue H-326 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Polar Blue H-326 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Polar Blue H-326 color?

MyPerfectColor has the original Cerakote Polar Blue H-326 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Polar Blue H-326 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Polar Blue H-326?
The need for primer for Cerakote Polar Blue H-326 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.