Looking for color by Hex, RGB, CMYK, or Lab?

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application


A match of Cerakote Sea Blue H-172 is a cool blue-green with moderate saturation and a slightly muted character. It reads deeper than a bright aqua and less gray than a neutral blue, so the finish tends to look clean, restrained, and a little cool in tone.

MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service wear, or missed spots in the original finish. It is a practical match for coated metal parts, frames, enclosures, brackets, guards, panels, and related accessories, as well as screw heads, clips, trim plugs, end caps, and replacement hardware that need to coordinate with the surrounding finish. It also works well for sample panels and fabricated add-on pieces where the color reference matters more than duplicating the original coating process.

Because this is a cool, moderately saturated color, gloss, texture, film build, and substrate can change how blue or green it reads. A small repair beside an older cured finish may still show a sheen shift, edge, or texture difference even when the color match is close. Surface prep and even coverage are especially important on darker or uneven substrates.

When the existing part has aged or weathered, the original coated finish may not read exactly like the brand color reference, so matching to the part or an approved sample can be safer than relying on the code alone. This makes the paint useful for finish-aware repair work and coordinate pieces, while still recognizing that an installed cured finish can behave differently from a fresh liquid touch-up.

Similar colors:

Ridgeway Blue H-220
Sky Blue H-169
Polar Blue H-326

Product Data

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Sea Blue H-172 *

Will Cerakote Sea Blue H-172 match an existing cured finish exactly, or is there still a visible match risk?

MyPerfectColor precisely matches the color and finish for Cerakote Sea Blue H-172, but an older or already cured part can still read differently beside a fresh touch-up. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the repaired area looks in real use.

If you are matching a visible spot on an installed or weathered part, the safest approach is to expect some difference and compare against the actual part or an approved sample when possible.

Can Cerakote Sea Blue H-172 be used for touch-up after transportation damage, installation damage, fabrication work, or missed spots?

Yes. A match of Cerakote Sea Blue H-172 is commonly used as touch-up paint for chips, scratches, rub marks, drilled holes, cut edges, field modifications, and missed spots in the original finish. MyPerfectColor custom-matched paint is made to precisely match the color and finish so the repair can coordinate with the coated part.

Choose the format that fits the repair area, and keep in mind that a small touch-up beside a cured finish may still show some difference in sheen or texture even when the color match is correct.

Can I use Cerakote Sea Blue H-172 on screw heads, plastic snaps, trim plugs, or other ancillary parts that need to match a coated assembly?

Yes. A match of Cerakote Sea Blue H-172 is a practical reference for ancillary items such as screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, and other small parts that cannot go through the original coating process but still need close coordination with the assembly.

For these items, use MyPerfectColor touch-up paint or another suitable format for the part size and substrate. Surface prep matters, especially on plastic or plated hardware, so clean the part carefully and verify adhesion before applying the full piece.

If I order Cerakote Sea Blue H-172 in liquid paint, will it read the same as the original cured finish?

Not always. A match of Cerakote Sea Blue H-172 is a coating color reference, and MyPerfectColor precisely matches the color and finish, but a fresh liquid touch-up can still look different next to an installed cured finish because of gloss, texture, film build, cure, and age.

This is especially important when you are comparing a repair to an existing part instead of painting a separate replacement or accessory. If the side-by-side match is critical, use the actual part or an approved sample as your reference whenever possible.

What surface prep should I use before applying Cerakote Sea Blue H-172 to metal, plastic, or a previously coated part?

Start with cleaning and degreasing so the surface is free of dirt, oil, and residue. For many substrates, light scuffing helps adhesion, but the right prep depends on whether you are working on bare metal, plastic, or an existing coating.

Primer may be needed for some surfaces, especially plastic or unknown previous coatings. If the part is critical or the substrate is not consistent, test a small area first so you can confirm adhesion and appearance before finishing the full part.

How quickly will I receive my paint matched to Cerakote Sea Blue H-172?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Sea Blue H-172 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Cerakote Sea Blue H-172 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Sea Blue H-172 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Sea Blue H-172? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Sea Blue H-172, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Sea Blue H-172 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Sea Blue H-172 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Sea Blue H-172 color?

MyPerfectColor has the original Cerakote Sea Blue H-172 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Sea Blue H-172 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Sea Blue H-172?
The need for primer for Cerakote Sea Blue H-172 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.