Match of Cerakote™ Crushed Silver H-255 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Crushed Silver H-255 is a medium-light silver gray with very low chroma and a slight cool cast. It reads as a restrained, neutral finish rather than a bright silver, so the color appears muted and calm under most lighting.

For touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish, this shade works on brackets, enclosures, guards, rail mounts, trim plates, screw heads, washers, plugs, and other ancillary items that need to blend with a coated assembly. MyPerfectColor precisely matches the color and finish, giving you a custom spray paint option for replacement parts or field-installed details that need close coordination with a Cerakote reference.

Even with a close match, a fresh liquid finish can read differently from an older cured part because gloss, texture, film build, and substrate condition affect how the gray appears. The low chroma makes this color less sensitive than metallic or effect finishes, but sheen differences and surface prep can still show at the repair edge when the new coating sits beside an existing finish.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Crushed Silver H-255 *

Will MyPerfectColor's Cerakote Crushed Silver H-255 match an existing cured finish exactly?

MyPerfectColor precisely matches the color and finish for Cerakote Crushed Silver H-255, but an older or already cured part can still read differently than a fresh repair. Gloss, texture, cure, age, substrate, and batch variation can all change how the finish looks beside the original part.

If the match is going next to an existing coated surface, compare against the actual part or an approved sample whenever the tolerance is tight.

Is Cerakote Crushed Silver H-255 a good match for touch-up after chips, scratches, or missed spots?

Yes. A match of Cerakote Crushed Silver H-255 is commonly used as a touch-up reference for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, and missed spots in the original finish.

MyPerfectColor precisely matches the color and finish, which makes it a practical choice when you need repair paint for a specific coated finish. For the best result, clean and prep the area carefully and use the right format for the size of the repair.

Can I use Cerakote Crushed Silver H-255 on screw heads, clips, or other small parts that cannot be coated the same way?

Yes. A match of Cerakote Crushed Silver H-255 can be used to coordinate ancillary items such as screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, fastener hardware, and brackets that cannot go through the original coating process.

MyPerfectColor precisely matches the color and finish so those separate parts can blend with the coated assembly as closely as possible. For small parts, choose a format that fits the part size and access, such as touch-up paint, spray paint, or paint pens.

Will Cerakote Crushed Silver H-255 in liquid paint look the same as the original cured finish?

Not always. Even when MyPerfectColor precisely matches the color and finish for Cerakote Crushed Silver H-255, a fresh liquid touch-up can still look different next to an original cured surface because of gloss, texture, film build, substrate, and age.

If the finish is high visibility or has a special effect, it is safer to compare against the actual coated part or a sample panel before ordering.

How should I reorder Cerakote Crushed Silver H-255 to keep multiple parts consistent?

Reorder by the exact brand color name and code, Cerakote Crushed Silver H-255, and keep the product type and finish the same across the job. That gives you the best chance of consistent results on related parts.

For repeat work, use the same prep method, substrate, and application approach whenever possible. If the parts must match an approved panel or an existing coated part, verify the finish on a test piece before completing the full order.

How quickly will I receive my paint matched to Cerakote Crushed Silver H-255?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Crushed Silver H-255 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Crushed Silver H-255 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Crushed Silver H-255 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Crushed Silver H-255? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Crushed Silver H-255, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Crushed Silver H-255 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Crushed Silver H-255 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Crushed Silver H-255 color?

MyPerfectColor has the original Cerakote Crushed Silver H-255 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Crushed Silver H-255 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Crushed Silver H-255?

The need for primer for Cerakote Crushed Silver H-255 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.