Looking for color by Hex, RGB, CMYK, or Lab?

Match of Cerakote™ Smith & Wesson Grey H-214 *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application


A match of Cerakote Smith & Wesson Grey H-214 is a light, muted gray with a cool, slightly blue cast. The low chroma keeps it subdued rather than bright, and the mid-light value gives it a clean industrial look without turning stark.

It is well suited to touch-up after transportation damage, installation damage, fabrication work, service wear, or missed coverage on coated parts. MyPerfectColor precisely matches the color and finish, which makes it useful for repair spray work on frames, brackets, housings, enclosures, fastener heads, end caps, trim plugs, and other ancillary items that need to coordinate with a Cerakote-coated assembly.

Because this is a light color with a subtle cool undertone, substrate color and surface prep can still influence the final read. Dark or uneven bases may show through more easily, and gloss or texture differences can be noticeable beside an older cured finish even when the color reference is correct.

For side-by-side repair against an aged or weathered part, finish matching matters as much as color matching. A fresh liquid touch-up can coordinate closely, but it may not read identically to every existing cured coating because film build, sheen, and wear history can differ.

Similar colors:

Battleship Grey H-213
Crushed Silver H-255
Mag Silver V-165

Product Data

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Smith & Wesson Grey H-214 *

Will MyPerfectColor paint matched to Cerakote Smith & Wesson Grey H-214 look exactly like my existing cured finish?

MyPerfectColor precisely matches the color and finish for Cerakote Smith & Wesson Grey H-214, but an older cured part can still read differently after application. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the finished repair compares to the surrounding coating. If the match has to be judged beside an existing part, a sample panel or the part itself is the safer reference.

Is Cerakote Smith & Wesson Grey H-214 a good match for touch-up after transportation damage, installation damage, fabrication damage, or missed spots?

Yes. A match of Cerakote Smith & Wesson Grey H-214 is commonly used as a touch-up reference for chips, scratches, rub marks, handling damage, transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish. Order it when you need MyPerfectColor paint matched to the color and finish for repair work, not the original coating material itself.

Can Cerakote Smith & Wesson Grey H-214 be used on screw heads, trim plugs, end caps, clips, or other ancillary parts?

Yes. A match of Cerakote Smith & Wesson Grey H-214 is a practical reference for ancillary items that cannot go through the same original finish process but still need to coordinate with the coated assembly. That includes plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fasteners, and small brackets. MyPerfectColor offers matched paint in formats such as touch-up paint, custom spray paint, and paint pens for this kind of work.

What should I expect when matching Cerakote Smith & Wesson Grey H-214 with a liquid touch-up instead of the original coated finish?

Use Cerakote Smith & Wesson Grey H-214 as the color reference, but do not expect a liquid touch-up to read exactly the same as an older cured coated part in every case. Even when MyPerfectColor matches the color and finish, the installed repair can still differ because of gloss, texture, film build, cure, and surface condition. If the new paint will sit next to an existing coated panel, the safest approach is to compare against the actual part or an approved sample.

Can Cerakote Smith & Wesson Grey H-214 look different if the gloss or texture on the original part is not the same?

Yes. With Cerakote Smith & Wesson Grey H-214, the base color can be correct and still look different if the original surface is matte, satin, smooth, textured, or otherwise finish-sensitive. Gloss, texture, and film build change how the color reads after application. For a closer ordering decision, match both the color reference and the target finish condition, especially when the repair will be viewed next to an existing cured part.

How quickly will I receive my paint matched to Cerakote Smith & Wesson Grey H-214?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Smith & Wesson Grey H-214 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Cerakote Smith & Wesson Grey H-214 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Smith & Wesson Grey H-214 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Smith & Wesson Grey H-214? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Smith & Wesson Grey H-214, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Smith & Wesson Grey H-214 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Smith & Wesson Grey H-214 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Smith & Wesson Grey H-214 color?

MyPerfectColor has the original Cerakote Smith & Wesson Grey H-214 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Smith & Wesson Grey H-214 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Smith & Wesson Grey H-214?
The need for primer for Cerakote Smith & Wesson Grey H-214 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.