Match of Cerakote™ O.D. Green H-236 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote O.D. Green H-236 reads as a dark, muted olive green with a gray cast. The low chroma keeps it subdued rather than clean or bright, and the low LRV gives it a deeper, lower-reflectance appearance.

This finish is well suited to touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots on coated parts. It can also be used on screw heads, washers, clips, trim plugs, end caps, switch covers, brackets, vent pieces, rail components, and other small fabricated or ancillary items that need to coordinate with a Cerakote-coated assembly. MyPerfectColor precisely matches the color and finish, making it a practical option when the reference finish matters but the part cannot go back through the original coating process.

Because this is a dark, low-chroma color, surface prep and sheen differences can be noticeable on repaired areas, even when the color match is close. A liquid spray match can still read differently from a cured part because gloss, texture, film build, and substrate all affect the final appearance. On a finish this deep, underlying scratches, sanding marks, or thin coverage can also show more readily than they would in a lighter color.

If you are matching an existing installed part, a sample panel or the part itself is safer when the finish has aged, weathered, or has a distinct texture. That matters most on visible repairs, where the color reference may be correct but the aged coated surface no longer reads exactly like a fresh finish.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ O.D. Green H-236 *

Will MyPerfectColor for Cerakote O.D. Green H-236 match my already cured part exactly?

MyPerfectColor precisely matches the color and finish for Cerakote O.D. Green H-236, but an older or already cured part can still read differently next to a fresh repair. Gloss, texture, cure, substrate, film build, weathering, and batch variation can all affect appearance.

If you need the closest practical match on an existing part, compare against the actual coated piece or an approved sample before ordering.

Can I use Cerakote O.D. Green H-236 for touch-up after damage or missed spots?

Yes. A match of Cerakote O.D. Green H-236 is commonly ordered as touch-up paint for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish.

MyPerfectColor precisely matches the color and finish, which makes it a practical option when you need to repair the affected area rather than repaint the entire part.

Can Cerakote O.D. Green H-236 be used on screw heads, clips, or plastic snaps that were not finished in the original process?

Yes. A match of Cerakote O.D. Green H-236 is often used for ancillary items and small hardware that cannot go through the original coating process but still need to coordinate with the finished assembly.

That can include screw heads, fastener covers, trim plugs, end caps, clips, brackets, and similar parts. MyPerfectColor precisely matches the color and finish, so it is a good fit when close color coordination matters more than duplicating the full factory process.

Be sure the prep and application method are suitable for the actual material.

Why might a MyPerfectColor match of Cerakote O.D. Green H-236 look different from the original cured finish?

Because Cerakote O.D. Green H-236 is a color reference, not the full coating system. MyPerfectColor precisely matches the color and finish, but a fresh liquid touch-up can still look different beside the original cured finish because of gloss, texture, cure, film build, surface prep, and age.

If the part has weathered or if the finish has a strong texture or effect, a side-by-side match can be harder. In those cases, compare the match to the actual part or an approved sample before you order.

What should I confirm before ordering Cerakote O.D. Green H-236 from MyPerfectColor?

Confirm the exact color name and code, the finish you expect, the product format you need, and the quantity before ordering Cerakote O.D. Green H-236.

Custom-matched orders are made to order, so they should be checked carefully because they are not returnable or refundable. If you are matching a specific part, an approved sample or the actual part is the safest reference.

How quickly will I receive my paint matched to Cerakote O.D. Green H-236?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote O.D. Green H-236 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote O.D. Green H-236 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote O.D. Green H-236 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote O.D. Green H-236? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote O.D. Green H-236, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote O.D. Green H-236 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote O.D. Green H-236 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote O.D. Green H-236 color?

MyPerfectColor has the original Cerakote O.D. Green H-236 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote O.D. Green H-236 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote O.D. Green H-236?

The need for primer for Cerakote O.D. Green H-236 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.