Match of Cerakote™ Sniper Green H-229 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Sniper Green H-229 is a dark, low-chroma green with an olive-khaki character and a muted brown undertone. It reads more subdued than a clean green, and its low LRV gives it a deeper, heavier appearance on coated parts.

MyPerfectColor precisely matches the color and finish, making it useful for touch-up after transportation damage, installation damage, fabrication work, service wear, or missed spots on coated parts. It can also be used on screw heads, trim plugs, fastener covers, end caps, brackets, enclosures, fabricated frames, and other ancillary items that need to coordinate with a coated assembly or a replacement part.

Because this is a dark, muted finish, gloss level, texture, and film build can change how the color reads, especially beside a cured existing coating. Small repairs may show a boundary or sheen difference even when the color match is close, and lighter or uneven substrates may need careful coverage to keep the tone consistent.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Sniper Green H-229 *

Will MyPerfectColor Sniper Green H-229 match an older cured Cerakote finish exactly on the part I already have?

MyPerfectColor precisely matches the color and finish of Cerakote Sniper Green H-229, but an older cured part can still read differently from a fresh repair. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the finish looks beside the existing part.

If the area is highly visible or the tolerance is tight, an existing coated part or approved sample panel is usually a safer reference than the color code alone.

Can I use Cerakote Sniper Green H-229 for touch-up after transportation damage, installation damage, or missed spots in the original finish?

Yes. A match of Cerakote Sniper Green H-229 is commonly used as a touch-up reference for chips, scratches, rub marks, drilled holes, cut edges, fabrication damage, transport damage, installation damage, and missed spots in the original finish.

MyPerfectColor offers matched touch-up paint and other formats for these repair jobs, so you can coordinate the repaired area with the surrounding coated finish.

Can MyPerfectColor Sniper Green H-229 be used on ancillary parts like screw heads, clips, trim plugs, or plastic snaps?

Yes. A match of Cerakote Sniper Green H-229 is often ordered for small ancillary items that need to coordinate with a coated assembly, including screw heads, rivet heads, clips, covers, trim plugs, end caps, fastener hardware, and plastic snaps.

These items may not go through the same original coating process as the main part, so a matched paint is a practical way to keep the visible hardware close to the surrounding finish.

If I order MyPerfectColor Sniper Green H-229 as liquid paint, will it look the same as the cured Cerakote finish on the part?

MyPerfectColor can make a liquid paint match of Cerakote Sniper Green H-229, but a fresh liquid touch-up can still look different next to a cured finish. Even when the color reference is correct, gloss, texture, film build, surface prep, and aging can change how the repaired area reads.

For separate parts, samples, or larger repaint work, the match is usually easier to use than for a small spot blended into an older cured finish.

Should I match Cerakote Sniper Green H-229 from the color code, or is an existing coated part or sample panel better?

For Cerakote Sniper Green H-229, the color code is a good starting point, but an existing coated part or approved sample panel is better when the finish is highly visible, the tolerance is tight, or the original part has texture or surface effects that matter.

If you have the actual part or a sample panel, that reference reduces the risk of ordering a close color that still does not read the same next to the installed finish.

How quickly will I receive my paint matched to Cerakote Sniper Green H-229?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Sniper Green H-229 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Sniper Green H-229 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Sniper Green H-229 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Sniper Green H-229? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Sniper Green H-229, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Sniper Green H-229 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Sniper Green H-229 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Sniper Green H-229 color?

MyPerfectColor has the original Cerakote Sniper Green H-229 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Sniper Green H-229 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Sniper Green H-229?

The need for primer for Cerakote Sniper Green H-229 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.