Match of Sherwin Williams™ 57423 *

Do not choose Sherwin Williams 57423 from a screen alone. Compare it to a physical swatch from Sherwin Williams or a known existing sample, then order MyPerfectColor paint matched to that reference. MyPerfectColor matches the brand color target, but an old painted surface can look different because of aging, sheen, and substrate.

Yes. MyPerfectColor custom spray paint matched to Sherwin Williams 57423 is a practical choice for switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar small parts. Make sure the part is clean and properly prepared so the finish reflects the color match, not dust, grease, or loose old coating.

Apply Sherwin Williams 57423 in light, even coats instead of one heavy pass. Hold the can about 8 to 12 inches away, overlap each pass slightly, and keep moving to avoid wet spots and runs. Let each coat flash and build coverage gradually, since deeper colors can show uneven film build if applied too heavily.

Plastics vary a lot, and slick or low-energy plastics can be harder to coat. Test Sherwin Williams 57423 on the actual part first, and use the MyPerfectColor primer for better adhesion when the surface is difficult. Clean the part well, follow the primer and paint directions, and do not assume one plastic behaves like another.

The SDS is tied to the MyPerfectColor product chemistry, not to Sherwin Williams 57423 as a color name. Look up the SDS for the exact format you plan to order on the MyPerfectColor Safety Data Sheets page: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. If you are comparing spray paint to another product type, check the SDS for that specific product.

MyPerfectColor has an original sample of the Sherwin Williams 57423 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 57423. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 57423, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.