Match of Sherwin Williams™ 57410 *

For Sherwin Williams 57410, start by cleaning the surface, removing grease or residue, and letting it dry fully. If the material is already painted or has a smooth finish, light scuffing where appropriate can help the new coating grip better. Mask off areas you do not want coated, and test a small area on the actual surface before doing the full project.

If you are coating a part that will sit near an existing painted surface, the test is especially important because prep, texture, and sheen can change how a match of 57410 reads after application.

A match of Sherwin Williams 57410 is a good candidate for MyPerfectColor custom spray paint when you need a match of 57410 on small, awkward, or removable items. Common uses include trim details, fixtures, railings, vents, pipes, hardware, accessories, and other parts that are harder to coat evenly with a brush.

This format is often useful when you want the item itself to be coated to the selected color reference, not when you are trying to repaint a large area with a different application method. For larger or very specific surfaces, confirm the format before ordering.

No. A match of Sherwin Williams 57410 can read differently in matte, satin, semi-gloss, or gloss because finish changes how light reflects off the surface. The color formula may be the same, but the finished look can appear lighter, deeper, flatter, or more reflective depending on sheen.

If you need the new coating to sit near existing painted parts, choose the finish carefully and test the selected sheen on the actual material before committing to the full project.

Choose the sheen based on how the part will be used, cleaned, and viewed. Flatter finishes usually reduce glare and can be more forgiving on surface imperfections, while glossier finishes are typically easier to wipe clean and reflect more light. The same Sherwin Williams 57410 color can therefore look different depending on the finish you order.

If the item will be handled often or needs regular cleaning, pick the sheen that fits that use rather than choosing by color alone. For a close visual result, test the selected sheen on the actual substrate before coating the full piece.

Yes, Sherwin Williams 57410 can be used as MyPerfectColor custom spray paint on many plastics, but plastics vary a lot and some low-energy surfaces need extra prep for reliable adhesion. Clean the part well, test on the actual material, and do not assume every plastic will behave the same.

Using the MyPerfectColor primer for Acrylic Enamel can help improve adhesion on difficult substrates. If the part is important or unfamiliar, a small test first is the safest way to confirm how a match of 57410 will perform on that specific surface.

MyPerfectColor has an original sample of the Sherwin Williams 57410 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 57410. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 57410, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.