Match of Sherwin Williams™ 50317 *

Finish changes how Sherwin Williams 50317 will look after it is applied because sheen changes reflectivity. The same color can read a little different in flat, satin, gloss, or another finish even when the color match is correct.

MyPerfectColor matches the color reference, but the code itself does not define sheen. Choose the finish that fits the part you are coating, and expect the final look to be influenced by the substrate, texture, and light on the finished item.

Yes. A match of Sherwin Williams 50317 can be ordered as MyPerfectColor custom spray paint for small parts such as switch covers, vents, knobs, brackets, trim pieces, speaker grilles, and similar items where a smooth sprayed finish is useful.

This is a match of Sherwin Williams 50317 made by MyPerfectColor, not the original Sherwin Williams paint. For best results, make sure the part is cleaned and prepared for the substrate you are coating before spraying.

Plastic can be a good use case for Sherwin Williams 50317 in MyPerfectColor spray paint, but plastics vary a lot. Some plastics accept coating more easily than others, so testing on the actual part is important before committing the whole item.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. If the plastic is unfamiliar, flexible, or low-energy, extra prep and a test spray are the safest way to reduce the risk of adhesion problems.

Before ordering Sherwin Williams 50317, confirm the brand reference, the MyPerfectColor product type, the sheen, and the quantity you need. The color code is only a reference target, so it does not tell you the finish or how the color will look on a specific surface.

Custom-made color matches are not returnable or refundable, so it is important to verify the order details before you buy. This matters most when the new coating will sit beside an existing painted surface, where differences in age, sheen, texture, or wear can be noticeable.

MyPerfectColor spray paint matched to Sherwin Williams 50317 is dry to touch within minutes, should be recoated in 1 to 2 hours, and is fully cured in about two weeks.

Dry to touch, recoat time, and full cure are different stages, so do not treat them as the same thing. If you need to handle, stack, or install the part soon after painting, plan around the cure time as well as the dry time.

MyPerfectColor has an original sample of the Sherwin Williams 50317 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 50317. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 50317, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.