Match of Sherwin Williams™ 49766 *

Choose the finish based on how the item will be used, cleaned, and handled. The color target for Sherwin Williams 49766 stays the same, but the sheen changes how reflective it looks and can affect durability and cleanup.

If the part will be touched often or needs easier cleaning, a higher-sheen finish may be more practical. If you want less reflectivity, a lower-sheen finish will read flatter. The code by itself does not define the finish, so confirm the sheen before ordering.

Primer depends on the substrate, surface condition, and the paint type you plan to use. As a general rule, primer never hurts and can improve adhesion, but it is not always required.

For Sherwin Williams 49766, check the prep guidance for the exact MyPerfectColor product you are ordering. Bare, glossy, repaired, or unknown surfaces are the most likely to benefit from primer or a test spot first.

Coverage depends on the surface size, texture, hiding power, application method, and the number of coats needed. For Sherwin Williams 49766, plan based on the actual object or area, not just the color name.

A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet. Rough surfaces, dark-to-light changes, and colors that need extra build can require more material, so it is smart to allow some margin.

Yes, but plastics vary widely, so it is important to test Sherwin Williams 49766 on the actual plastic you plan to paint. Surface type, flexibility, and existing coatings can change adhesion.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. Clean the part well and try a small test area before finishing the full item, especially on unfamiliar or slick plastics.

It may not look exactly the same. Even when MyPerfectColor matches Sherwin Williams 49766 correctly, placement, lighting, sheen, and nearby surfaces can change how the finished coating reads.

If the item will sit next to existing paint or be reviewed in a specific location, test it on the actual surface in the actual environment whenever possible. That is the best way to reduce approval risk before committing to the full project.

MyPerfectColor has an original sample of the Sherwin Williams 49766 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 49766. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 49766, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.