70% of Orders Ship within 3 Business Days.
Match of US Government™ AMS-STD-595 35040 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of US Government AMS-STD-595 35040 is a very dark gray with a cool blue lean and very low chroma. It reads close to charcoal in practical use, with a faint blue cast rather than a warm brown or green undertone. Its low LRV means it stays visually heavy and can look deeper as sheen increases.
MyPerfectColor custom-matched paint is made to match the selected Fed Standard or AMS-STD-595 color reference, not an official government-issued coating system. That makes it useful when a drawing, maintenance note, procurement package, or replacement part calls for this specific standard and you need a repeatable color target.
This color is well suited to spray coating brackets, panels, equipment housings, enclosures, switch covers, railings, carts, hardware, and fabricated support parts where a dark government-standard gray is specified. It can also work for prototypes, training aids, and restoration pieces that need to visually track the reference across metal, plastic, or composite surfaces.
Because the color is so dark, surface texture, dust, and sheen differences can be more noticeable, especially on large flat parts or beside older coatings. If you are matching an in-service item, the standard reference may not look the same as a weathered or sun-exposed finish, so a project-specific sample or existing-part comparison may be warranted when the match is acceptance-sensitive.
Similar colors:
Product Data
Perfect Color Ventures LLC DUNS Number and CAGE Code
MyPerfectColor DUNS Number: 117438928
MyPerfectColor CAGE Code: 8SUA4
MyPerfectColor is compliant with section 889. Download the Record of Section 889 Representations PERFECT COLOR VENTURES LLC.
About US Government Federal Standard (now Aerospace Material Specification / AMS) 595 Colors. Fed-Std-595C / FED STD 595 Colors
The Federal Standard (now Aerospace Material Specification / AMS) 595 colors are used to specify colors for US Government applications. The color are used by the US Government agencies, branches and suppliers. The most common requests we receive for Fed Standard Colors are for spray paint, Direct to Metal and other paints for prototyping, marking and identification and touchup applications. Typical clients include the USCG, all branches of the Armed Services, the State Department, Lockheed Martin and Boeing. For example, we provided paint to the Navy for marking shells with the specific Fed Std color designated to identify the type of round.
We offer 5 standard sheens in our lacquer touchup paint: flat, low lustre, satin, semi-gloss or gloss. We also offer a full range of Alkyd and Acrylic Direct To Metal paints. Please contact us if you have any questions. Please submit RFQs to [email protected]
The colors in the Federal Standard set have no official names and are identified by five-digits. The numbers designate the sheen, color classification and color intensity.
The first digit will be 1,2 or 3 and indicates the level of sheen:
1 = gloss
2 = semi gloss
3 = matt
The second digit indicates the color group;
0 = Brown 5 = Blue
1 = Red 6 = Grey
2 = Orange 7 = Other (white, black, violet, metallic)
3 = Yellow 8 = Fluorescent
4 = Green
The third to fifth digits indicate the intensity. Lower numbers indicates a darker color and higher numbers indicate a lighter color.
While the Fed Std colors indicate sheen as part of the 5 digits, MyPerfectColor still requires you to enter a specific sheen. For example, the color Fed Std 37038 technically refers to a matte finish, but MyPerfectColor offers it in any sheen.
Frequently Asked Questions About Match of US Government™ AMS-STD-595 35040 *
What does AMS-STD-595 35040 tell me when ordering MyPerfectColor paint matched to AMS-STD-595 35040?
A match of US Government AMS-STD-595 35040 is a government color reference target. It tells you the color you want MyPerfectColor to match, but it does not by itself define the coating chemistry, gloss level, surface prep, corrosion system, or any formal approval status.
If your project calls out AMS-STD-595 35040, order the MyPerfectColor product type that fits the job, then confirm the finish and quantity separately.
Will MyPerfectColor paint matched to AMS-STD-595 35040 match an older in-service coating on my part?
Not always. Even if the code is correct, an older coating can look different because of weathering, fade, sheen change, texture, or a different prior coating system.
For touch-up next to an aged finish, a standard color match may be acceptable if small differences are okay. If the repair is acceptance-critical or very visible, it may be better to match the existing part or use a sample panel before placing the order.
Why can MyPerfectColor paint matched to AMS-STD-595 35040 look different after application?
The color code sets the reference target, but the finished appearance also depends on gloss, matte or satin level, texture, and film build. Those factors can change how AMS-STD-595 35040 reads on the part after it dries.
If appearance is important, choose the finish that matches the project requirements, not just the color code.
How do I choose the right MyPerfectColor product for AMS-STD-595 35040 based on use environment?
Start with the service environment, then choose the product format that fits it. AMS-STD-595 35040 gives you the color target, but it does not tell you whether you need spray paint, touch-up paint, epoxy, urethane, or another coating type.
Match the product to the substrate and exposure conditions on your project, including interior or exterior use, abrasion, and chemical exposure, before you place the order.
What should I confirm before ordering custom MyPerfectColor paint for AMS-STD-595 35040?
Confirm the exact government color code, product type, finish, and quantity before you order. For custom-made color matches, mistakes are costly because the paint is made to your selected reference and custom color matches are not returnable or refundable.
If your project depends on AMS-STD-595 35040, review the specification carefully before checkout so you order the right match the first time.
When will I receive my paint matching US Government AMS-STD-595 35040? Can I get it right away?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match US Government AMS-STD-595 35040 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the US Government AMS-STD-595 35040?
The RGB values for US Government AMS-STD-595 35040 are 0, 0, 0 and the HEX code is #000000. The LRV for US Government AMS-STD-595 35040 is 0.01. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to US Government AMS-STD-595 35040? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to US Government AMS-STD-595 35040 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Does US Government paint color US Government AMS-STD-595 35040 need primer?
MyPerfectColor doesn't sell US Government paint, but it does match the US Government AMS-STD-595 35040 and all the other US Government colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How do I buy paint in the US Government AMS-STD-595 35040?
Many types of paint are available for US Government AMS-STD-595 35040 with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to US Government AMS-STD-595 35040?
The US Government AMS-STD-595 35040 is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
How do I get a Certificate of Conformance (CofC) for the US Government AMS-STD-595 35040?
Contact MyPerfectColor support if you need a certificate of conformance for US Government AMS-STD-595 35040. We are happy to provide this with your order.
Does this US Government AMS-STD-595 35040 meet my spec?
The US Government AMS-STD-595 35040 is the color portion of the spec. The remaining part of the spec will indicate the type of paint needed. Paint can be purchased directly from the color page, but MyPerfectColor offers many additional paint types not visible from the color page. Please contact us if you are not sure what you need, you don't see what you are looking for, or you need a quote to proceed. MyPerfectColor can furnish Certificates of Conformance upon request.
Color details
RGB 0, 0, 0
HEX: #000000
LRV: 0.01%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
