Match of Valspar™ Brick Red *

Choose the finish based on how the item will be used and how much reflectivity you want. A lower-sheen finish usually hides surface marks better, while a higher-sheen finish is easier to wipe clean and will show more gloss. The same Brick Red color can look slightly different in matte, satin, or gloss because sheen changes how light reflects off the surface.

If you need several parts to look consistent, order the same Valspar Brick Red match, the same sheen, and the same product type for every piece.

Coverage depends on the size of the object, the texture of the surface, how well the paint hides, the application method, and how many coats are needed. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet.

For Valspar Brick Red, plan for extra material if you are painting rough, porous, dark, or uneven surfaces, or if the part needs more than one coat. Measure the actual parts you are painting and add some allowance for edges, overspray, and touch-up during the job.

Plastics vary widely, so test Valspar Brick Red on the actual material before painting the full part. MyPerfectColor spray paint sticks well to most plastics, but using the MyPerfectColor primer can improve adhesion and help reduce the risk of peeling or poor bonding.

Clean the plastic first, remove dust or release agents, and test a small hidden area when possible. This is especially important for PVC pipe, vents, grilles, covers, and other molded parts that may have different surface chemistry from one item to the next.

Clean the metal to remove oil, dust, wax, and other contamination, then scuff glossy surfaces so the new coating can grip better. If there is rust, loose paint, or damaged coating, address that before applying Valspar Brick Red.

The condition of the old coating matters. Existing gloss, texture, and wear can affect how the finished Brick Red color looks even when the color match is correct. For railings, hardware, fixtures, or other metal parts, a sound, clean surface usually gives the most even result.

Custom-made color matches of Valspar Brick Red should be ordered carefully because they are not returnable or refundable. Before you buy, confirm the color reference, the MyPerfectColor product type, the sheen, and the quantity you need.

If you will need more later, keep the same Brick Red reference and ordering details so you can reorder consistently. That helps avoid differences between batches, product formats, or sheen choices.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar Brick Red enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar Brick Red you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar Brick Red in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.