Pantone™ PMS 2008 U

Pantone PMS 2008 U is a color reference, not a coating specification. It does not define sheen, film build, substrate, or application method. Those factors strongly affect how a color looks once applied.

If you try to use PMS 2008 U to blend into an existing finish, even small differences in gloss, texture, or substrate can make the color appear off. For that reason, Pantone PMS colors should be treated as visual targets for brand-facing work, not as a reliable proxy for matching an existing painted surface.

The SDS is tied to the paint product and chemistry, not to the Pantone PMS 2008 U color itself. Once you select a specific paint type or format, the SDS for that product applies regardless of the color being matched.

After ordering or selecting a product, look for the SDS in the SDS library for that paint system. If you are comparing products, review the SDS for each option before ordering to confirm safety and compliance needs.

Pantone PMS 2008 U works well as a visual color target for prototypes and concept models where brand alignment is the goal. The key decision is choosing a paint format and finish that is appropriate for how the prototype will be viewed.

Plan to evaluate the color on the actual substrate and under the lighting where the prototype will be reviewed. For high-visibility presentations or approvals, producing a sample panel first helps confirm coverage, hide, and perceived color before committing to full application.

Start with a clean surface. Remove dust, oils, and residues using an appropriate cleaner or degreaser, then allow the surface to dry fully. Cleanliness has a direct impact on adhesion and final appearance.

Where appropriate for the substrate, light scuffing can help promote adhesion. Always apply a small test area first to confirm adhesion and appearance before full application, especially on unfamiliar materials.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2008 U. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2008 U in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.