Pantone™ PMS 108 U

Pantone PMS 108 U is a visual color target, and its appearance can change based on surface texture. Smooth surfaces tend to reflect light more evenly, making the color look cleaner and brighter. Textured or rough substrates create shadowing that can make the same PMS 108 U paint appear darker or less saturated.

If visual accuracy matters, especially for branded elements, apply a sample of PMS 108 U on the actual substrate and finish you plan to use. This helps confirm how texture will influence the final appearance under real lighting.

PMS 108 U is a Pantone target color, not a fixed visual outcome. Surface texture changes how light reflects and creates micro-shadows. Smooth surfaces tend to reflect more light evenly, making PMS 108 U appear cleaner and brighter. Textured or porous substrates scatter light and create shadowing, which can make the same color read darker or less saturated.

If brand accuracy matters, evaluate PMS 108 U on the actual substrate and texture you will use. A small sample helps confirm whether the appearance is acceptable before committing to production.

The Safety Data Sheet is tied to the specific paint product and chemistry, not to the Pantone PMS 108 U color code itself. Once you select a paint type, such as spray paint or another available format, the corresponding SDS applies regardless of the color.

You can find the correct SDS in the SDS library for the selected product. If you are evaluating multiple paint types, review the SDS for each option to ensure it meets your handling and compliance needs.

The Safety Data Sheet is tied to the paint or coating product, not to the Pantone color itself. PMS 108 U defines the color target, but the SDS depends on whether you choose spray paint, brush-applied paint, or another product type.

After selecting the specific product format for PMS 108 U, you can find the corresponding SDS in the SDS library for that product. Always review the SDS for the exact product you are ordering.

Yes. Pantone PMS 108 U is commonly specified in brand standards for signs, displays, and exhibit components where visual brand alignment is required. The Pantone code acts as a shared reference so different vendors and materials can target the same color.

Because signage and exhibit builds often involve varied substrates and lighting, it is best practice to produce a physical sample of PMS 108 U on the actual material. This allows brand stakeholders to review and approve the appearance before full production.

Yes. PMS 108 U is commonly specified in brand standards for signs, displays, and exhibit elements where visual brand consistency is required. Pantone PMS colors serve as a shared reference so different vendors can aim for the same color target.

Because materials, finishes, and lighting vary, it is best practice to sample PMS 108 U on the actual substrates used in the build. This confirms the visual result under real conditions before final fabrication.

When applying a PMS 108 U match to metal, proper surface preparation is critical. Existing coatings should be clean and lightly scuffed as appropriate so the new coating can adhere evenly. Any residue or surface inconsistency can affect how the color appears.

For powder-coated or pre-finished parts, the existing color and gloss level can influence the final look of PMS 108 U. Since finish and reflectivity impact perceived brightness, evaluating a sample on the prepared metal surface is strongly recommended before committing to a full run.

When matching PMS 108 U on metal, surface preparation matters. Existing coatings, gloss level, and cleanliness can all affect how the color appears. Scuffing and proper cleaning help create a consistent base so the color reads as intended.

Powder-coated or high-gloss surfaces may reflect more light, making PMS 108 U appear brighter than expected. Review a sample on the prepared metal surface to confirm appearance before producing finished parts.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 108 U. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 108 U in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.