Match of Valspar™ VR113E Shady Lady *

Coverage depends on the size of the part, the texture of the surface, how well the color hides, the application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet per gallon.

For VR113E Shady Lady, plan using the actual surface area, then add room for texture, edges, and extra coats. If the substrate is rough, porous, darker than the target, or difficult to spray evenly, order extra rather than trying to finish with one can.

The color reference stays VR113E Shady Lady, but the finish can change how the matched color reads after application. Matte, satin, and gloss reflect light differently, so the same match may look flatter in a low sheen and deeper or brighter in a higher sheen.

If the item will sit next to an existing coated surface, choose the sheen carefully because the finish can affect whether the two parts appear consistent. The code by itself does not define sheen, so you need to select the finish as part of the order.

Plastics vary widely, so it is important to test the paint on the actual material before coating the finished item. MyPerfectColor spray paint sticks well to most plastics, but prep and primer can still matter a lot for adhesion.

If the plastic is slick or low energy, use the MyPerfectColor primer to improve adhesion and reduce the risk of peeling or poor bond. For VR113E Shady Lady on plastic trim, covers, or small parts, test first and confirm the prep steps before painting the full piece.

Clean the metal or old coating first, then scuff the surface so the new paint has something to grip. If there is rust, loose paint, grease, or other contamination, remove it before you spray MyPerfectColor paint matched to VR113E Shady Lady.

The condition of the old coating matters too. Gloss, texture, and surface wear can change how the finished color looks, even when the color match itself is correct. If the part is heavily damaged or unstable, address that before ordering the final finish.

Choose the sheen based on how the item will be used, how much glare you can accept, how durable you want the finish to be, and how easy it needs to be to clean. The same VR113E Shady Lady match can look different across sheens because gloss level changes light reflection.

If you are coating a handled part, fixture, or removable component, compare the practical tradeoffs before ordering. The color code identifies the target color, but you still need to select the finish that fits the item and the surface.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar VR113E Shady Lady enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar VR113E Shady Lady you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar VR113E Shady Lady in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.