Match of Valspar™ VR082E Blown Glass *

No. The color reference VR082E Blown Glass stays the same target, but the finish can change how it reads after application. Matte, satin, and gloss reflect light differently, so the same match can look a little lighter, deeper, or more reflective depending on sheen.

If you need the new coating to sit beside an existing painted surface, keep in mind that sheen differences can be just as noticeable as color differences. For best results, order the finish that fits the item and the surface you are coating.

Primer may be needed depending on the substrate, its condition, and the paint type you are applying. Bare, slick, damaged, or uneven surfaces often benefit from primer, and a primer can also help when you want better adhesion and more uniform coverage.

The safest approach is to check the prep guidance for the specific MyPerfectColor product you plan to order. In general, primer never hurts and can only improve the system, but it is not always required for every surface.

Choose sheen based on how the item will be used and how much reflection you want on the finished surface. Flatter sheens usually hide minor surface flaws better, while glossier sheens are easier to wipe clean and will make VR082E Blown Glass read more reflective.

Because finish changes appearance, do not treat sheen as only a style choice. It is a practical ordering decision that affects durability, cleanup, and how closely the completed piece will resemble the intended color target.

Yes. MyPerfectColor custom spray paint matched to VR082E Blown Glass is a practical option for small parts, hardware, and fixtures where a smooth sprayed finish is wanted. It is often used for items such as switch covers, vents, speaker grilles, brackets, trim pieces, and similar components.

For best results, make sure the part is cleaned and properly prepared for the material it is made from. The same color can behave differently on metal, plastic, wood, or previously coated surfaces, so a test application on the actual part or a spare piece is a smart step before finishing the whole project.

Coverage depends on the size of the item, the texture of the surface, the hiding power needed, the spray method, and how many coats you plan to apply. A typical spray can covers about 20 square feet with one coat, but rough, porous, dark, or uneven surfaces can require more paint.

If you are coating multiple parts or want extra margin for test spraying and second coats, plan accordingly. For non-spray formats, coverage can be very different, and many standard paints cover about 400 to 600 square feet, depending on the product and surface.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar VR082E Blown Glass enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar VR082E Blown Glass you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar VR082E Blown Glass in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.