Looking for color by Hex, RGB, CMYK, or Lab?

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate


A match of Valspar V130-3 Turning Tables is a muted, warm taupe-beige with a soft gray-brown undertone. It sits in a light-to-medium range with low chroma, so it reads subdued rather than bright or clean.

MyPerfectColor custom spray paint matched to the selected Valspar color can be useful on small parts and accessories where a quiet warm neutral is needed. Common spray-paintable uses include vent covers, switch plates, speaker grilles, shelf brackets, picture frames, cabinet pulls, railings, mailboxes, and PVC trim pieces. It also works well for removable fixtures and hardware that need to coordinate with existing painted surfaces without drawing attention to the part itself.

Because this is a low-chroma color, it usually behaves more like a neutral than a vivid tint, but finish and substrate still matter. Matte and satin finishes can soften its brown-gray cast, while glossier finishes may make surface texture, patching, or sheen differences easier to notice. As with any custom spray paint, coverage can vary with the base color and prep, so darker or uneven substrates may need additional coats for even color.

Similar colors:

VR096D Turning Table
M132 Packed Sand
112Q Packed Sand

Product Data

About Valspar Paint

The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.

Matching Valspar Paint Colors

MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar V130-3 Turning Tables by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.

The colors shown on this website are computer video simulations of the Valspar V130-3 Turning Tables and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar V130-3 Turning Tables. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Valspar™ V130-3 Turning Tables *

Can I order V130-3 Turning Tables as MyPerfectColor spray paint for baskets, frames, or furniture accents?

Yes. MyPerfectColor can make a custom-matched spray paint for a match of V130-3 Turning Tables, which is practical for baskets, frames, shelving, decor pieces, brackets, hardware, and other small parts that need to coordinate to that color.

This is MyPerfectColor paint matched to the selected Valspar color reference, not Valspar's original paint product. For best results, choose the format that fits the part you are painting and prepare the surface for the material you are coating.

What spray-paint technique should I use for V130-3 Turning Tables to avoid runs or uneven coverage?

Use light, even coats, keep a consistent spray distance, and overlap each pass slightly. Avoid heavy wet passes, because they can cause runs, uneven sheen, or a muddy-looking color build.

Allow each coat to flash off before applying the next. That matters on a match of V130-3 Turning Tables because the final appearance depends on how much paint is laid down and how smoothly it is applied, not just on the color formula itself.

How can lighting change how V130-3 Turning Tables looks after MyPerfectColor applies it?

Even when the color match is correct, V130-3 Turning Tables can read differently after application depending on lighting, sheen, placement, and nearby surfaces. The same finished part may look different in daylight, indoor light, or next to an older painted item.

If the item will sit beside an existing painted surface and visual alignment matters, it is better to plan for that variation instead of relying only on how the color looked on a screen.

How do I confirm V130-3 Turning Tables before ordering a MyPerfectColor match?

Confirm V130-3 Turning Tables from a physical Valspar swatch or a known existing painted reference, not from monitor color alone. MyPerfectColor matches the original brand color reference, so the key decision is whether this is the exact target you want to reproduce.

The code does not tell you the sheen, product line, or how an already painted surface will look once coated, so verify the original color reference before placing the order.

How much MyPerfectColor spray paint do I need for V130-3 Turning Tables?

A standard spray can typically covers about 20 square feet with one coat, but actual coverage depends on surface texture, preparation, application method, and how many coats are needed for V130-3 Turning Tables.

For small parts like vents, frames, or hardware, one can may be enough. For rough, porous, or color-changing surfaces, plan extra material so you do not run short before the project is finished.

How quickly will I receive my paint matched to Valspar V130-3 Turning Tables?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Valspar V130-3 Turning Tables depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the Valspar V130-3 Turning Tables?
The RGB values for Valspar V130-3 Turning Tables are 188, 173, 160 and the HEX code is #BCADA0. The LRV for Valspar V130-3 Turning Tables is 42.95. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to Valspar V130-3 Turning Tables? And how many spray cans do I need?

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar V130-3 Turning Tables enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

What is the Hue Angle and Chroma for Valspar V130-3 Turning Tables?
The Hue Angle for Valspar V130-3 Turning Tables is 68.01 and the chroma is 8.97. The Hue Angle represents the position of a color's hue around a color wheel. The Chromacity represents the intensity of a hue. Learn more about browsing colors by hue.
Does Valspar paint color Valspar V130-3 Turning Tables need primer?
MyPerfectColor doesn't sell Valspar paint, but it does match the Valspar V130-3 Turning Tables and all the other Valspar colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How can MyPerfectColor color match the Valspar V130-3 Turning Tables in paint?

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar V130-3 Turning Tables you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

How do I convert Valspar V130-3 Turning Tables to a different color from another paint company?

While we can provide Valspar V130-3 Turning Tables in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.