Match of Valspar™ V065-1 Touch Of Frost *

The Safety Data Sheet is tied to the MyPerfectColor product formulation, not the V065-1 Touch Of Frost color name alone. You can review the MyPerfectColor Safety Data Sheets page here: Safety Data Sheets.

If you are comparing product options, check the SDS for the exact MyPerfectColor paint type you plan to order, since different chemistries can have different safety information.

Choose the sheen based on the part you are coating and how much wear it will see. Lower sheen options usually reduce reflectivity and can be a better fit when you want the matched color to read less shiny. Higher sheen options are typically easier to wipe clean and often handle wear better, but they also make surface flaws and application marks more visible.

Keep in mind that the same V065-1 Touch Of Frost color can look different in matte, satin, or gloss because sheen changes how light reflects off the finished item. If the part will sit next to an existing painted surface, match the sheen as closely as possible to reduce appearance differences.

Yes, but plastics vary a lot, so it is important to test the V065-1 Touch Of Frost match on the actual plastic before coating the full part. MyPerfectColor spray paint sticks well to most plastics, but some surfaces need more prep or a primer to improve adhesion.

For difficult or low-energy plastics, use the MyPerfectColor primer for better adhesion and follow a test-first approach. If the part is small or removable, that is often the safest way to confirm the finish and adhesion before you commit to the whole project.

Before ordering V065-1 Touch Of Frost, confirm the brand color reference, the MyPerfectColor product type, the sheen, and the quantity you need. Custom-made color matches are made to order, so it is important to be sure about the exact color target and the format you want.

Because these are custom orders, they are not returnable or refundable. If you are comparing options, make sure you are ordering a match of V065-1 Touch Of Frost in the correct finish and product format for the surface you plan to paint.

For metal, start by cleaning off dirt, grease, rust, and other contamination before applying a match of V065-1 Touch Of Frost. If the metal has an old coating, its condition matters because gloss, texture, peeling, and uneven wear can all affect how the new finish looks.

Scuffing the surface is often helpful when you are painting over intact existing coating, but failing paint or active rust should be corrected first. Good surface prep will improve adhesion and help the matched color look more even on the finished part.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar V065-1 Touch Of Frost enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar V065-1 Touch Of Frost you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar V065-1 Touch Of Frost in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.